Amplifier Hum


Hi, I have a Parasound HCA 2200 II that has started to make a humming noise. The noise is coming from the amp itself not the speakers. It just started doing this but still seems to function fine. Previously it was dead silent. The amp has about 3 years of use on it. My question: Is it time to sent to Parasound for a tune-up or is there somthing I can check myself? (the amp is not under warranty as I'm not the original owner) Any help would be greatly appreciated.
Thanks
skeevay
Garfish, I thought you sounded familiar. How's the DNA-2 upgrade working for you?

Here's what I did to eliminate my DNA-2 LAE's transformer hum:

If you narrow the hum down to the amplifier's transformer, try to determine which circuit the amplifier is running off of. Then check the circuit breakers in the service panel.

Chances are that your amps' circuit is on the opposing phase of 115 volts of some or all of your other audio circuits and therefore generating some AC noise that's affecting the transformer.

Have an electrician move all of your audio circuit breakers in the service panel to the same phase of 115 volts.

Just for grins I moved my amp's circuit over to the opposing phase where my other dedicated audio circuits are to see what sonic improvements I may find. No sonic improvements that I could tell but it cured my transformer hum and the transformer has been almost dead silent every since.

And yes, I too have heard the possibility that the mounting of the transformer itself could have loosened as Cford points out above.

-John
John; The Rev. A upgrade sounds fantastic on music-- but still the nagging hum problem. As I need to have an electrician come out anyway, I'll ask him to check phase as you've suggested. Thanks. Craig
I had the same thing happen to me on a McIntosh preamp and turned out to be a faulty power transformer. They replaced that and no more hum.
Post removed