Eminent Technology ET-2 Tonearm Owners



Where are you? What mods have you done ?

I have been using these ET2's for over 9 years now.
I am still figuring them out and learning from them. They can be modified in so many ways. Bruce Thigpen laid down the GENIUS behind this tonearm over 20 years ago. Some of you have owned them for over 20 years !

Tell us your secrets.

New owners – what questions do you have ?

We may even be able to coax Bruce to post here. :^)

There are so many modifications that can be done.

Dressing of the wire with this arm is critical to get optimum sonics along with proper counterweight setup.

Let me start it off.

Please tell us what you have found to be the best wire for the ET-2 tonearm ? One that is pliable/doesn’t crink or curl. Whats the best way of dressing it so it doesn’t impact the arm. Through the spindle - Over the manifold - Below manifold ? What have you come up with ?
128x128ct0517
Slaw-

I am using no damping. Have seen descriptions of magnetic damping, but not sure where to place a magnet or what sort to use. Meanwhile I am awaiting arrival of a "double spring" I beam, presumably one that is stiffer than my present one.
HI Phil – I ended up finding a decent magnet for damping on the fridge. One of those appointment holders for pieces of paper. I placed it immediately to the left of the manifold on the platform where the spindle comes out so it is under it. Some blue tac secured it.

Some interesting info

Eminent Technology Patent Info
Cheers
Well I finally got around to trying the dual leaf I beam. I went back to the single leaf as I liked the bass better.
Apbiii - exactly. We are comparing apples to apples - well almost.

What is the compliance of the cartridge u r using and where on the scale (what number) are your weights sitting at ? Mine are on the very end of the the IBeam past the 6 and it is a high compliance cartridge.

From Frogmans earlier post as a guide.

2 or more leaf springs - heads more toward a leaner sound due to lower compliance – more detail and refinement.

One leaf spring – best tracking - but sound can become too full, even bloated and diffuse due to the higher compliance of just one spring.

This is what I am hearing going from a single to double leaf spring. Is this what u r hearing too?

Now the hard part for me.
It took me about 4 songs or – 20 minutes to find the right VTA in my system. The armtube when I look at it - seems to have a slightly negative VTA now - it was lowered. I am very close to the sweet spot stylus angle/groove with my records/system. Not finished. Bass returned but is now more refined/has real weight.
Chris,

The cartridge that I use has medium / low compliance (15x10-6) or thereabouts.

I am using three small or one large weight and it is in the area of 5 on the beam.

I did notice a little leaner sound with the double leaf spring but found a loss in bass so I went back to the single leaf. For what it is worth I play and listen to a lot of live acoustic music (I play guitar and upright bass in a bluegrass / old time setting several times a week) and I am not a fan of the lean hard sound some folks claim is "Hi Fi".

I did change the VTA a bit but my cartridge does not seem to be terribly sensitive to VTA.