Zoethecus Cone - Long Shot

While it's unlikely that you can find someone with just the right cone any other footer manufacturer should be able to male you up a set of cones with the right threads on the associated bolts. For example BDR offer threaded cones (not necessarily endorsing a CF cone btw but just as an example) http://www.bdrsound.com

First step is to take the thread of a good cone down the hardware store so you can find out what exactly it is as there are a variety in use -- my stand manufacturer makes footers with options for the range of common threads -- see https://www.grandprixaudio.com/product-page/apex-levelers

Anyway good luck -- look at this as a way to get a better solution than the OEM!

Thanks for the information, I have the exact specs on the bolt size after another trip to the hardware store. I’ll check out bdrsound and others to see what I can come up with. Appreciate your reply. Thanks again...

 Not all Zoethecus cones are the same thread size. I have 2 Zoethecus 4 shelf stands. When I moved, I found that the thread size was not the same on both racks. The cones were not interchangeable.

I have seen cones for sale on occasion on Ebay. But aftermarket  is a good way to go. I don't think there is anything special about the cones. BTW at least one of my  Zoethecus racks came with both cones and sliders.

I knew it would be highly improbable to find a replacement. I didn't know the thread sizes would be different, especially on the racks. I suspect my best option is to a new set of cones/spikes for this rack.  

I was able to have a machine shop repair the bent bolt. I appreciate the responses and info provided. Thanks again, Skip