wright sound company, step up wmt100

Mark, I have a 1:10 Wright SUT that I additionally add resistors via Y connectors, bringing the "stock" load of 100 to 40 ohms instead (to more closely match the DL103 impedance). I also use a 1:36 SUT built from Cinemag transformers (by a friend) that sounds excellent, to my ears anyway. It provides a load of 37.5 ohms without adding anything to it.

Whether you go with a 1:10 or a 1:36 you'll be way better off than with no step-up with the Denon.

Some people really like the Denon step up, you might want to do some research in vinyl asylum as well as here. It's cheap, it's plug and play, and people say it works well. I've never used it so I can't provide a first-hand account though.

Jim

I have it and enjoy it immensely, with the Wright WPP100 and a Sound-Smith rebuilt Denon DL103. For me the sound benefits substantially when matching the SUT load to the cartridge, by adding resistors via Y connectors on the input of the SUT.

Jim

Hey Mark.

In my experience tube rush will be minimal (if any at all) if you keep the gain pots on the unit lower than 9:00. But unless you've got gain to burn in your amp, having the pots this low probably won't provide you with much output using a LOMC cartridge without a SUT.

I think that if you are running the gain pots high enough to run a LOMC with the Wright you're certain to have a lot of tube rush! It might help to keep in mind that while it has tons of gain the WPP100 is a MM phono stage.

IMHO it would be definitely worthwhile to get or make a SUT. There is a lot of information about how to make a high quality SUT inexpensively with Cinemag transformers, over at the vinyl asulum. If you are certain that you won't be getting a SUT though you might consider selling the Denon and getting a good quality MM instead?

I hope this helps.

Jim