wood tonic hurts ?

I'm using a "mini-Statement" ("Comment"?) system. ML
CLS 1's with Kinergetics SW800 sub towers. Yeah, I love these speakers so much that I get a little kinky with them late at night. Hence... the non-toxic oil ;-)

Jim-By the way, what speakers do you use? You must really love them (if you are kissing them).

The only thing I would caution is when dealing with veneer. Too much solvent based or even oil based treatment can damage the adhesive and cause the veneer to seperate from the cabinate. Fortunately this occured when trying to revive a worthless old table. Use enough, not too much.

I've been using a food grade mineral oil -- the same stuff I use on maple block surfaces -- very effective, safe and non-toxic when lips are pressed against the speakers.

A second vote for Howard Feed-N-Wax. Just make sure that your cabinets are not sealed with polyurethane or epoxy finishs because then any wax or oil will slide right off.

I have used "Howard Feed-N-Wax" with very good results. I first used it on a Monterey dining table from the 40-50's's that was is very poor condition and it worked so well that I use it on everything now, including speaker cabinets. Even on "light cherry wood", for example, it does not change/darken the color of the finish.

I've been using Lemon Oil for many years on all of my wood (including speakers) and have had no problems (no darkening or other changes in the wood). I would recommend Lemon Oil on your wood furniture and appliances. It also smells very nice.

Two parts Vodka, one part Wood Tonic, twist of lime. Stirred, not shaken. Wheel your main rig out, pull up a chair by the water, light up a fine Cuban cigar. Somone wake up, this dream is starting to get a little bizarre...

I also forgot to mention that Wood Tonic only hurts when you drink it. Besides that, it makes a lousy aftershave !!! Talk about "burning in".... : ) Sean
>

As long as you put it on the wood and NOT the drivers, you'll be okay : )

Somethine else that breathes life back into old cabinets is Lemon Oil. The oil feeds the wood AND adds back some of the original rich wood tones that used to be there before age and fading set in. Once again though, keep it away from the drivers and surrounds. Sean
>