Wilson Watt Puppy 7 and Watch Surrounds?

Cougmeister, you definately have a reference video section. A Wilson speaker system would highly compliment what you already have. If you are going to use the BAT gear for 2 channel, I would suggest you take a look at the Krell Showcase processor for HT playback. If you are going to use the processor for 2 channel playback, take a look at the Krell HTS 7.1. I have WP 7's and a G90 in my system. The 7's are spectacular for music and HT. I will be adding the DVP 5000, Wilson Watch surrounds, and Krell Showcase processor soon.

Wpuppy, I was considering the Krell HTS 7.1, Theta Casablanca II, or the Lexicon MC12B. There are so many different opinions, it is difficult to decide which one is best.

My thought is to use the BAT VK 51SE to power the WP7's, and the VK 6200 to power the Watch surrounds. I read somewhere that Lamm monoblocks for the WP7's would also be good...instead of the VK 51SE. I don't know, since I will still use the VK 6200 for surrounds. I presently have an SVS sub that is outstanding...and I don't know if I will change it. I will probably want to add several smaller subs around the room for complete surround sound. The AV controller will be to process the information...but I don't know which to choose.

Once these decisions are made, I need help with interconnects and with speaker cables. Do you have recommendations?

If you are using the g90 and Wilson WP7's, you have a good start on the best.

I have a second g90 with a DVP 5000 in my bedroom. I am using an Arcam AV8 controller and B&W Nautilus 800's with 805 surrounds. The vivid colors of the g90 along with the smooth DVP 5000 processing is excellent. The B&W's are very good in this setting...very clean...I am using BAT preamp/amp here too. "Monster's Inc." is incredible 3D sound and vivid almost 3D video.


Thanks for the help.

ok, I have wp 6's with BAT/vk50se and vk75se. Personally, I'd max out the 2 channel first. Maybe add Wilson's watchdog sub and upgrade the vk6200 to vk150se's. Then add the watch surrounds. Maybe keep the 6200 to power them down the road. I'd keep the 51se for 2 channel and run it in pass thru mode with a surround processor of your choice.

just my opinion...

How would putting Lamm monoblocks on the front...WP7's. Then and use the VK6200 for the Watch surrounds?

Thanks for the advise.