In this thread we see the assumption by some people that multichannel is the same thing as HT. Not so!! The most significant difference is regarding the center speaker. With HT it is desirable to have a center speaker with limited and shaped frequency response because this makes dialogue clearer. For music the opposite is true because the center front speaker almost always gets the strongest signal.
Regarding speakers that reproduce both violin and voice well...some do better than others, but IMHO you really need several different speakers to do everything best. From my experience here are a few examples...
1..Spoken work...KLH5...a three-way using a pair of very lightweight 4" drivers for midrange. (These drivers were used full range in the KLH table radio).
2..Dixieland jazz, and other music with lots of trumpets...Any speaker using compression horn driver(s) for mid and tweeter.
3..Violin...B&W 550 small 2-way monitors with titanium tweeter.
My regular speakers are Maggie 1.6 and they do a good job, if not the best, over a wide range of material.
Regarding speakers that reproduce both violin and voice well...some do better than others, but IMHO you really need several different speakers to do everything best. From my experience here are a few examples...
1..Spoken work...KLH5...a three-way using a pair of very lightweight 4" drivers for midrange. (These drivers were used full range in the KLH table radio).
2..Dixieland jazz, and other music with lots of trumpets...Any speaker using compression horn driver(s) for mid and tweeter.
3..Violin...B&W 550 small 2-way monitors with titanium tweeter.
My regular speakers are Maggie 1.6 and they do a good job, if not the best, over a wide range of material.