"This measurement is of course to be taken at the right VTF as varying it will change the SRA." So will the thickness of the vinyl(ie: standard thin Columbia pressing vs 180 or 200 gram disc).
VTF, VTA, SRA, and 92 degrees - question
I'm familiar with the logic that has been out there for a while about setting SRA at 92 degrees for what is considered the optimal styus position, based on a lot of analysis done by Elison and others. My question is, if VTF and VTA are set per cart maker's recommendations (let's discount Anti-skate for this discussion even though it would come into play), then wouldn't the SRA be automatically set optimally per the manufacturer's intention? Assume a cart that is built to the company's design parameters - no bent cantilever, no offset stylus etc.
Take a Benz cart for example. Many (if not all) of them specify a VTA of 20 degrees. So if VTF (and yes A-S) and arm height are set so that when all's said and done the VTA is 20 degrees, isn't that what it *should* be set at based on how Benz expects that cart to perform?
I ask because I set the SRA on my Benz to 92 degrees going by that camp, and when I checked the SRA it was at - guess what - about 22 degrees. That kind of suggests Benz expects the stylus to be at 90 degrees relative to the record. Isn't that how they've designed it? Don't I run the risk of having to compensate in other ways if the cart winds up exhibiting tracking problems at an SRA that does not support the specified VTA?
Take a Benz cart for example. Many (if not all) of them specify a VTA of 20 degrees. So if VTF (and yes A-S) and arm height are set so that when all's said and done the VTA is 20 degrees, isn't that what it *should* be set at based on how Benz expects that cart to perform?
I ask because I set the SRA on my Benz to 92 degrees going by that camp, and when I checked the SRA it was at - guess what - about 22 degrees. That kind of suggests Benz expects the stylus to be at 90 degrees relative to the record. Isn't that how they've designed it? Don't I run the risk of having to compensate in other ways if the cart winds up exhibiting tracking problems at an SRA that does not support the specified VTA?