2. analog
  3. 1232902020

Vinyl sounds a bit thin and slightly strident.

The analog side of my system looks like this:
Benz Micro Ebony H Cartridge(Broken in). VTF around 1.9g.
No Headshell weight.
VPI Scout/JMW-9 Signature Arm(Wired w/Nordost Valhalla)
Cardas Neutral Ref Phono Balanced.
Audio Research PH-2 Balanced Phono Pre
Cardas Neutral Reference IC's
Audio Research LS-7 Preamp w/Electro-Harmonix Tubes from ARC
Cardas Hexlink 5C
Mark Levinson No.331
Purist Audio Design Aqueous Bi-wire
B&W Nautilus 803S
I recently purchased a used Sony 9000ES SACD player and noticed I could listen for extended periods of time and I just kept wanting to play music because it is a great sounding player and very engaging and realized that I'm having a hard time getting as involved with my vinyl rig and I've concluded that the big contributing factors are a lack of bass weight, mid-bass bloom and the top end is a bit strident.
Has anyone else had a problem such as this? And what device(s) should I tweak or change in order to alleviate these sonic characteristics? I suspect my overhang may be off and a contributing factor due to just using the stock VPI protractor. I want to get a Wally Tractor soon.
Any thoughts?
n803nut

Showing 1 response by jbaxley

jbaxley's avatar
jbaxley
50 posts
 
I have a TNT Jr. with HRX motor, an original JMW-12, and a Ruby 2. You have an excellent table and cartridge, so it should make beautiful music. Maybe I'm biased, but I don't think the problem is with the choice of equipment.

My general approach is: start with the most simple fix and work up from there. So, I would first double check to be sure that the table is perfectly level. If it's not, the whole presentation will be off. Next, I'd try lowering the VTA, which is easily done and the solution may be as simple as that. (To second Frogman, LOWER the VTA). Next, I would try a different cartridge loading. Perhaps try these simple things, in order, and then report back?
More to discover