Vandersteen Quatro Crossovers

Jeff, you were waaaay off on this one pal. You have great info many times but this time you are mistaken. As for crossover I suppose you can try what you want but know ideal is O.E.M. parts.

you must have the Vandersteen x 5 set to your amps proper input imp as in the owners manual I would suggest you
make sure you do this so not to get deeper in than you already are.
Best Johnnyr

No. The first reason is that the ones you linked to are second order (12db/octave) whereas the M5-HP is first order (6db/octave). Secondly, the filters are placed in series with the signal and their quality affects the entire audible spectrum. The parts in the Vandy filters are high quality and cost several hundreds of dollars at retail. Even if the Parts Express filters were first order, the speakers would likely end up sounding different.

I thank all of you for being so concerned that I'm destroying the UB/lower-MR drivers of my 5As by using a hi-pass filter point (HPFP) lower than 100Hz. But if that were to happen, my speakers would have been ruined many months ago. In fact, they aren't; they still sound excellent and maybe better than ever.

'Tis a fact that there's virtually nothing in this crazy hobby that's black or white, ESPECIALLY the results of very-'slow'-slope first-order filters. Do youz guyz really think that a...say...1- or 2dB difference in energy at...say...70Hz is going to ruin a driver in one of these systems? The overall volume a system is driven to has FAR more affect on the energy getting to a driver than the frequency of the HPF.

And how about the highly 'nominal' input-impepedance specs of some amps? My McCormack DNA-750s use transformers at the inputs to reverse the signal polarity going to one section of the amp. The amp's stated input impedance is 10K, but the actual impedance for CR filtering is 16.7K, measured very carefully and repeated. THAT difference would move the calculated HPFP 2/3 ovtave!

So calm your indignation, boys. My HPFP that turned out to be 58Hz is working excellently with my 5As, bringing with it a slight increase in overall warmth and richness without any 'thickness' in the lower frequencies, and I also run the bassamp controls lower than if I were using a 100Hz HPFP.

Youz guyz ought to be paying more attention to the head-banging, screaming-and-crashing dideeboppers who ARE overdriving their bass and MR drivers, not me.
.
:-)
.

Its okay if you run the speakers upside down if you want to.... Most people who post are trying to help people set up the speakers correctly and by the book. The whole system is designed for 100Hz and the manual includes instructions on how to get it correct irregardless of the quoted amp impedance. If you don't agree with Richards design, that is fine but not wise to mislead others. Moving the high pass frequency from 100 hz affects the phase and amplitude of the bass system, period. Just a reminder that it is not personal, just trying to help people to get it right. If you have the guts call Richard and get the straight scoop.