Van Alstine?

Yes,

I did gather up the information from before. And it did speak to my original question. Unless there is something spectacular about the AVA amps, then I see no reason to change. I do like my Bel Canto M300s but was interested in simplifying and going with a transitor stereo amp. On the other hand, the M300s do many things well and for now I intend to keep them. I strongly considered the W4S amps but at present it would be a lateral move and I would only do it to step up to 500W/1000W, and I most likely have no need. The W4S amps do have a higher input impedance (60,000 vs 10,000 via RCA) but my pre-amp seems to have no trouble with them. I am still learning. I am looking to simplify when I can, such as going to computer based playback. For the money, getting a W4S DAC would be a better move than a different amp. Thanks again for your info.

Rpfef, I'm surprised the W4S drove the Hawks without any real problems. As you said, and as we both know, they are a very tough load that hits under 3 Ohms for a good part of the low end. Digital amps typically don't do real well with a load like this (yes, I've heard other digital amps with similar loads).

I have owned Van Alstine equipment for 30 t years. Currently have Insight 440 Amp, Insight Preamp and DAC. Also use an older FET Vavle Pat 5 pre-amp in a different system. The stuff sounds great. The pieces are rugged as the mountains. Frank Alstine is always willing to answer questions and suffers this fool with patience. You should also be aware that upgrades are available and seems reasonably priced. Can't recommend highly enough.

I recently heard Van Alstines Latest series the Synergy series
The small one is 120 wpc anything you buy I strongly suggest
The a Double dye option 2x the heavy duty execon Mosfets.$99 upgrade well worth it it gives more power, control,dynamics, and fidelity.
I heard the 400 series that has 2x Mosfets standard it is like 240 wpc
He does not give lower ohm specs for Frank feels there are too many variables,used to loosely in the industry.it will though give you added wpc
Down lower.stable to a solid 2 ohms.
I thought this unit was Very musical , tight controlled Bass and a very full
Deep image soundstage Very tube like with better leading edge definition.
So good I just ordered the 300 double-dye around 180wpc or better into 4 ohms.since my speaker is a 4 ohm load .For $1,650 delivered a true high end bargain.if this was sold in a store $4k all day long,just on sonics alone.
I like the MOSFET character.the flagship is. $2kand another 80 wpc more.
I spoke with Frank . Over 45 years in the field he knows his electronics.
He explained a lot of guys use a lot of capacitors as a fail safe to clamp down for protection n the circuit. One thing down different here ,since
He hired a pretty progressive electrical engineer is many more regulated
Power supplies at different stages ,that would not be in the Audio path
Directly like many do with loads of capacitors.i do have to agree it sounds pretty dam clear ,and warm up time is a fraction of what I am used To.
The only down side is that I have to wait 2-3 weeks ,for each one
Is hand built tested, by Frank ,or his engineer.only then will it go out .
In the mean time I will just play around with my other 4 amps.

I must back up ,I changed my order to the Synergy 450
225 wpc into 8 ohms ,and roughly 450 into 4 ohms stable to 2ohms.
I will go on record that this will be very hard to beat even at $5k
Which it would be if working with dealers inside parts quality is first rate.
The plastic type connectors on back possibly could be improved
But the contacts are Brass then Gold plated at $2k a true hiend bargain
The preamps are also Vety good. Digital I think would rather use others
Such as the Schiit Gungnir.i owned several $4-5k dacs I love this $850 hiend bargain. Could not resist build quality excellent too !! value- no dealers.