Indranilsen, that is the absolute worst thing you could do. Bass is loudest at boundaries, walls and floors. The turntable should be on a heavy platform as far away from the system as you can get it 3-4 feet off the ground. Ideally you would take your turntable and phono amp put them in another room and use balanced interconnects. The best lay out is to use mono amps next to the speakers with very short speaker wires then long balanced interconnects to the low level equipment back near the listening position in a free standing rack, turntable and phono amp in the next room with long balanced interconnects. If you have an IR repeater and a remote control you can put everything in the next room. This is the absolute best if your system doubles for theater work.
Turntable placement and isolation
Hello,
I have a Clearaudio Concept turntable which was so far placed on a rack behind the two front floor standing speakers. I am currently changing the layout of my 2 channel system, removed the audio rack from that imaging-sensitive location and placed all electronics on the carpeted floor between/behind the speakers. Each component, except the turntable, is currently placed on a maple plywood (1 inch thick) which sits on the thick carpet. The floor is a wooden suspended floor. I am also trying out HRS platforms for isolating the electronics. I need some help/advise on the turntable placement on the floor. What are your thoughts on putting a turntable on a platform on the carpeted floor? Is this going to seriously degrade the sound? What could be used to isolate the turntable from the carpeted ground such that there are no footfall issues? I would really appreciate your feedback.
Thanks.
I have a Clearaudio Concept turntable which was so far placed on a rack behind the two front floor standing speakers. I am currently changing the layout of my 2 channel system, removed the audio rack from that imaging-sensitive location and placed all electronics on the carpeted floor between/behind the speakers. Each component, except the turntable, is currently placed on a maple plywood (1 inch thick) which sits on the thick carpet. The floor is a wooden suspended floor. I am also trying out HRS platforms for isolating the electronics. I need some help/advise on the turntable placement on the floor. What are your thoughts on putting a turntable on a platform on the carpeted floor? Is this going to seriously degrade the sound? What could be used to isolate the turntable from the carpeted ground such that there are no footfall issues? I would really appreciate your feedback.
Thanks.