Troubleshooting Help


Need some help/advice diagnosing an issue.

I have a Sunfire Vacuum Tube Pre-Amp with a 2 channel 300 Sunfire Load Invariant Amp.  Recently my sound has gotten really muddled. In addition, it appears that the sound that does come through is mono...ie...both channels sound the same when toggling between speakers.

Any tips/hints on issue?  Is this a tube issue?  I have not changed my tubes since i have had the amp. If it is the tubes any suggestions?
contact_bobt
Thanks all I replaced the 6922's and it eliminated the issues I was having.     Might try some different tubes to see if I can actually hear the difference.

According to the user manual, 
your preamp takes 6922 tubes in the linestage. 12AX7 and 6922 in the phonostage.
What are you using for a source?

In any event, take the cover off the preamp and pull one of the tubes from its socket. You can then see the brand of tube being used. You'll need to replace the 3 linestage tubes. (If you're using a turntable as a source, you should also replace the phonostage  tubes).

To give you an idea of various brands and prices check out the following link...
https://www.upscaleaudio.com/collections/preamp-tubes/6922-6dj8-7308-pcc88

New production tubes are made in Russia and are very affordable. Vintage tubes are higher quality from the good old days before transistors.

But first identify the current tubes. If you liked the way your preamp sounded, you can replace with the same brand.


I owned a 300, very good amp.
Did this muddy sound appear gradually? If so, this is how dying tubes behave.
The mono type of sound could also be tubes. The bias may have changed due to lower voltage to the tubes, IOW, tubes are weak.

Music will sound less dynamic, less detailed, soundstage will diminish when tubes are dying. Are you experiencing this?