Try contacting Parasound, for an answer: https://parasound.com/support.php#:~:text=You%20can%20call%20the%20Parasound,at%20sales%40parasound.....
Trigger Trouble
I decided to take advantage of the option to use the trigger feature to turn on both my Parasound amp and preamp with a single switch. I followed the directions in the owner’s manuals and used the cable provided with the equipment and . . . nothing. I switched the cable to see if either the preamp switch or amp switch would control the other. Didn’t work either way.
I went on-line to research solutions and found posts from a few years ago that stated that the trigger feature needs a grounded power connection to work. As I noted on another threat, my old home only had two prong electric outlets, and I had an electrician swap out the electric panel surge protectors for ones that legally allowed me to use three prong outlets, even thought there was no ground. Other members have urged that I have dedicated, grounded lines installed for improved sound. Apparently, that would also allow triggering to work, if what I have read is true.
You think so?
I went on-line to research solutions and found posts from a few years ago that stated that the trigger feature needs a grounded power connection to work. As I noted on another threat, my old home only had two prong electric outlets, and I had an electrician swap out the electric panel surge protectors for ones that legally allowed me to use three prong outlets, even thought there was no ground. Other members have urged that I have dedicated, grounded lines installed for improved sound. Apparently, that would also allow triggering to work, if what I have read is true.
You think so?