Last Lemming you can get new clips on line from several vendors. Buy a set of four that comes with the colored heat shrink tubing to identify the lead. Clip all the old clips off and trim the wire. Do one at a time so you do not forget which color you are working on. You will need a 25 watt soldering iron with a fine tip and electronics solder. You tin the end of each wire by holding the iron and solder against the wire until it melts in.
Insert the wire into the new clip hold the soldering iron at the junction of wire and clip and melt the solder in. Capillary action will suck it right up.
Slip the right color heat shrink tubing on and shrink it with a heat gun, A hair drier will not work. A torch in close proximity will but you have to be very careful not to burn anything. For what you would pay someone to do this you can get all this stuff and more then you will have it around the next time something goes south.
Mike
Insert the wire into the new clip hold the soldering iron at the junction of wire and clip and melt the solder in. Capillary action will suck it right up.
Slip the right color heat shrink tubing on and shrink it with a heat gun, A hair drier will not work. A torch in close proximity will but you have to be very careful not to burn anything. For what you would pay someone to do this you can get all this stuff and more then you will have it around the next time something goes south.
Mike