If you choose to go bi-wire: Use a cable that has two discrete pairs of conductors(full length) or two separate cables. You will gain nothing with regard to sound otherwise. Adding another pair of connectors to a single pair conductor cable is a waste of time. All you're doing is replacing the jumper with more wire that way. In some instances I suppose the wire may be better than the jumpers, but that would have to be a very low-end system. Most debates are pointless. It comes down to: If your system can resolve it, and you can hear(or will admit)a benefit: It's worth the effort! Here's a page with some further insights: (http//:www.soundstage.com/synergize/synergize031998.htm) Personally; I've been actively bi-amping for the past 28 years with excellent results.
To biwire or not to biwire, that is the question??
Thanks for taking the time to read. I have sifted through the mound of information regarding biwiring but have yet to come to a clear yes or no on the matter.
My question is as follows: Using a single 2CH amplifier run to speakers that are set-up to biwire utilizing a biwire cable (2 connections amp end/ 4 connections speaker end)should return no greater result than running a single wire to that same speaker and utilizing jumpers??? My reading suggests that unless you are bi-amping, simply taking the source of the signal at the amp, (2 connections) and splitting that into (4 connections at the speaker) is not positively affecting the sound?? Bi-amping on the other hand may return an improved sound as the signals are isolated and could affect the resistance of the load?
So I guess what my reading has indicated is that if you are only running a single amp (2 connections) to a bi-wire ready speaker (4 coonnections) you are really paying for a cable that has additional ends but should return no great end product as the signals are technically not distinct as in the case of using 2 ampsor an amp set up for bi-amping?
Any thoughts are welcome as this seems to be an endless debate???
My question is as follows: Using a single 2CH amplifier run to speakers that are set-up to biwire utilizing a biwire cable (2 connections amp end/ 4 connections speaker end)should return no greater result than running a single wire to that same speaker and utilizing jumpers??? My reading suggests that unless you are bi-amping, simply taking the source of the signal at the amp, (2 connections) and splitting that into (4 connections at the speaker) is not positively affecting the sound?? Bi-amping on the other hand may return an improved sound as the signals are isolated and could affect the resistance of the load?
So I guess what my reading has indicated is that if you are only running a single amp (2 connections) to a bi-wire ready speaker (4 coonnections) you are really paying for a cable that has additional ends but should return no great end product as the signals are technically not distinct as in the case of using 2 ampsor an amp set up for bi-amping?
Any thoughts are welcome as this seems to be an endless debate???