2. analog
  3. 1015285170

Thinking about buying a Canadian Thorens Turntable

Hello:

I am presently planning to add a turntable to my system. And while during the last few weeks, I have been looking at many suitors (a ProJect Perspective, a Rega Planar 25/RB600, a VPI HW-19 Jr./Rega RB600, and maybe, a used Thorens TD 126 Electronic (it could be either a Mk I, a Mk II, or a Mk III)). But with exception of the Thorens TD 126 Electronic, all of the other tables I am interested in are priced at $1,000.00 and up. Faced with the prospect of paying these prices for what I feel is a reasonably good turntable. And while I haven't ruled out paying that price for a new table if and when the situation should call for it, I would like to explore all of my options as well. And that means getting a used table in mint condition if at all possible. If I am going this route, then I am going to be looking at turntable/arm systems that were priced at $1,000.00 to $1,500.00 a few years back (which I can get right now for maybe $300.00 to about $650.00, depending on make, model and design. Condition of the table will be a major factor as well), or better yet, I may consider getting a used Thorens TD 146, TD 160 or TD 165. These are pretty respectable tables as well, and if I can get of these used off the net, then I could pay as little as $150.00 for one of these babies. The problem being is that the ones I am interested in seem to be located in Canada. What I want to know now is "is" the power source of Canada is different from the power source that is here in America?? What I mean is that typically, the power source here in America is 15 volts where as the Canadian's power source is about 16 volts (at least, that's what it says on the back of one of the units that I am interested in). And if it is, is there anyway I could get it converted to 15 volts here in America??? Or it doesn't make any difference one way or the other??

By the way, I am already settled on my Phono Stage. My Phono Stage is going to be the Monolithic PS-1 Dual-Mono Phono Stage/HC-1 Dual-Mono Power Supply.

Thanks in advance!!!!!!

--Charles--
128x128chaskelljr2001

Showing 3 responses by chaskelljr2001

chaskelljr2001's avatar
chaskelljr2001 OP
476 posts
 
David99:

Actually, it is (meaning that Thorens is a "German" Turntable manufacturer). But the models that I seem to be interested in so far are located in Canada. I have found them on "E-Bay".

--Charles--
chaskelljr2001's avatar
chaskelljr2001 OP
476 posts
 
Jim:

Thanks....... This was the advice I was looking for. And even though, the subject here was about the Thorens Turntables that are being sold on "E-Bay" which are from Canada, I will also be looking here at Audiogon as well. And who knows, I may even fetch me a better rig here for about the same amount of money as I probably would have if I were to buy something off of "E-Bay". My ultimate turntable budget is $1,500.00 (give or take). If I can get me a nice sounding rig without spending that much, then all the better. But if I feel that I can get me a rig that offers me a significant improvement, and the extra cost justifies it as well, then I'll be prepared to spend more if neccessary. But whatever the case may be as far as whether or not I will get me either a brand new turntable/arm/cartridge system or opt for a used turntable/arm system (I am going to want to choose my own cartridge), my budget will remain at $1,500.00. However, I am going to get me a brand new phono stage. And more than likely, if I cannot find the one I want locally (which is what I am going to try first), then I am prepared to go on-line and get it off of the internet (I will then deal with "Music Direct").

--Charles--
chaskelljr2001's avatar
chaskelljr2001 OP
476 posts
 
Dr_Joe:

Thanks Dr. Joe. That was what I was thinking about too. If I am going to get me a used Thorens, then a TD 126 is the first model I am going to aim for. A distant second will be a TD 160, with a TD 147 coming in a close third right behind the TD 160. But it is said that somewhere that if I should opt for a 126, then I should go for a Mk I or a Mk II version, and not go for the Mk III. Is there any truth to that??? And if so, why?? But let it be said that if I be lucky enough to end up with a 126 (and I am going to try like hell to find one), then damping the chassis is going to be one of the improvements I am going to make on the table. The other improvements to make on my 126 will involve getting a couple of mats to compensate for the difference levels of thickness of the records themselves, getting a clamp, changing the arm to a Rega RB600 or RB900 (if such an arm should fit the big Thorens) or hunt down an SME 3009 if the none of the Regas should fit, and then changing the tone arm cable and then the interconnects after that. If for some reason I cannot find and land a Thorens TD 126, then the alternative would be an Oracle that is about 10 years old or so. The Oracle, to my knowledge, is a better table than the Thorens.

Anyway, thanks for the input, Joe.

--Charles--
More to discover