2. cables
  3. 192845-188888

Thickest Power cord with Power distributor?

Hello everyone,

I have a question regarding the usage of power cord in my system.

Let's make it simple with fewer components.

I have an Ansuz C3 Power Distributor 

1 Zavfino Silver Dart power cord (thicker cable, small awg)

1 Ansuz P2 Power Cord (regular awg/thickness)

1 Integrated class A (about 400w consumption when in use.

In theory, where will you use the Zavfino cable? From wall to Power Distributor because of the higher current that can deliver to all the components?

 

Thanks 🙏 

miracle1980

Showing 3 responses by miracle1980

miracle1980 OP
11 posts
 

@mclinnguy Hello,

I mentioned Ansuz P2 (not D2). I also stated that the Ansuz P2 has a "regular" AWG, I suspect 12AWG.

The Zavfino then seems to be the best choice for wall to Power Distributor. At least on paper.

miracle1980 OP
11 posts
 

Thanks all for the comments!

At the end I tried the 2 cables, from wall to Power Conditioner (Ansuz C3)... and the differences were very minimal.

I felt like the Zavfino was more powerful (higher volumes perceived) and a little bit smoother. Again...these might be just perceptions.

It’s really difficult to switch off all the components...change the Power Conditioner cable...re-start all the components again and compare.

So...I ended up keeping the Zavfino from wall and the Ansuz (P2) connected to the streamer.

The other test might be to swap the cables after one week or 10 days... but, do I really want to do that?

Probably not :)

miracle1980 OP
11 posts
 

@jea48 Meanwhile i have moved to Czechia ;)

To be honest I have no idea how the earth works here or how the cables are ''done''... I'm bit ignorant on this topics :)

Maybe AI could help us here...

What i know: German and Dutch power cords have the ''phase'' (positive?) on the right pin. Same from the wall sockets.

In Czechia the wall sockets have the ''phase'' on the left... so if I now use a German power cord I have to connect it ''upside/down''.

 

More to discover