Dear @audioman58 @imgoodwithtools @oregonpapa and friends: Here are two gentlemans with good audio system and heavy tweaked that do not shares the " euphoria " by orengonpapa and several other audiophiles posting here and in the other fuse thread where between others
veerapaneni who owns really good system too just does not shares that " euphoria ". Me neither and as I said in the other thread I tested almost all the SR fuses but the blues and several other from many manufacturers.
These 3 examples and other similar could means that as better and lower distortions has the room/audio systems as really lower are the differences when changing a fuse and maybe when these gentlemans are hearing " something " that something in reality is not an improvement but only a different kind of sound.
Lesser fine tunned audio system always will shows " improvements " but in these lesser systems almost any change can makes a listeable difference for " the better ".
The " collective euphoria " spreaded here and the other thread on fuses have to be analized understanding the role of a fuse that is no more that a wire soldered/attached at both ends with the fuse taps where pass trhough the electrical power line.
That fuse has a " holder " that's is a pease of diferent kind of metal that sometimes comes soldered to a circuit board sometimes in other way and in this fuse holder the fuse seats and makes contact not tigth contact but a " so so " contact at both fuse sides. Obviously that the fuse holder has something to say about degradation on the electrical quality current pasing through.
wolf_garcia posted several things against the " collective euphoria " and many of you don't like him but no one of you gave a precise answer with facts on why the fuse makes that " euphorical " improvements other than your each one " euphoria ".
As those gentlemans that do not shares the euphoria my room/audio system is heavy tweacked too before and after I tested several and different fuses including the SR that at the end shows me that the " best fuse is not fuse at all ": this is a true and real difference for the better not " euphoria ".
No, I'm not against this or the other fuse thread but at some time could be time to put our feets in the floor and maybe what we need to do is to start an overall fine tunning ( theweack. ) of our system with out those fancy fuses and after that test the system again with the SR ones.
For this each one of you needs to have a proved and repeatable evaluation process where you have a self deep training. With out this whole evaluation process we can't attest with true what's really happening other than the spreaded " euphoria ".
We are not a " child " but experienced audiophiles stiked to a " new toy " but : are there true facts to justify it or is only a new toy and that's all?
Just think that if what you think is a fenomenal improvement that is made by around 2.0cm. of wire what could make better anykind of cables in your system where we are talking of meters not 2.0cms.
Anyway, this kind of threads helps all of us to THINK and understand the real audio system potential and where belongs it.
Can any one of you ask your self why amps, preamps, speaker, cdp high price$$$ manufacturers just don't use the fancy fuses?. When some one buy a 60K monobloks he does not find out the fancy fuses down there. You can be sure that if the fancy fuses makes that " euphorical " differences for the better all those $$$$ manufacturers will or were using it and they know a lot about quality listening and performance levels.
In the other thread I posted what the Music Reference designer and manufacturer D. Berning found out when using fancy fuses in his amps/preamps that in a word makes the: damage.
Regards and enjoy the MUSIC NOT DISTORTIONS,
R.
These 3 examples and other similar could means that as better and lower distortions has the room/audio systems as really lower are the differences when changing a fuse and maybe when these gentlemans are hearing " something " that something in reality is not an improvement but only a different kind of sound.
Lesser fine tunned audio system always will shows " improvements " but in these lesser systems almost any change can makes a listeable difference for " the better ".
The " collective euphoria " spreaded here and the other thread on fuses have to be analized understanding the role of a fuse that is no more that a wire soldered/attached at both ends with the fuse taps where pass trhough the electrical power line.
That fuse has a " holder " that's is a pease of diferent kind of metal that sometimes comes soldered to a circuit board sometimes in other way and in this fuse holder the fuse seats and makes contact not tigth contact but a " so so " contact at both fuse sides. Obviously that the fuse holder has something to say about degradation on the electrical quality current pasing through.
wolf_garcia posted several things against the " collective euphoria " and many of you don't like him but no one of you gave a precise answer with facts on why the fuse makes that " euphorical " improvements other than your each one " euphoria ".
As those gentlemans that do not shares the euphoria my room/audio system is heavy tweacked too before and after I tested several and different fuses including the SR that at the end shows me that the " best fuse is not fuse at all ": this is a true and real difference for the better not " euphoria ".
No, I'm not against this or the other fuse thread but at some time could be time to put our feets in the floor and maybe what we need to do is to start an overall fine tunning ( theweack. ) of our system with out those fancy fuses and after that test the system again with the SR ones.
For this each one of you needs to have a proved and repeatable evaluation process where you have a self deep training. With out this whole evaluation process we can't attest with true what's really happening other than the spreaded " euphoria ".
We are not a " child " but experienced audiophiles stiked to a " new toy " but : are there true facts to justify it or is only a new toy and that's all?
Just think that if what you think is a fenomenal improvement that is made by around 2.0cm. of wire what could make better anykind of cables in your system where we are talking of meters not 2.0cms.
Anyway, this kind of threads helps all of us to THINK and understand the real audio system potential and where belongs it.
Can any one of you ask your self why amps, preamps, speaker, cdp high price$$$ manufacturers just don't use the fancy fuses?. When some one buy a 60K monobloks he does not find out the fancy fuses down there. You can be sure that if the fancy fuses makes that " euphorical " differences for the better all those $$$$ manufacturers will or were using it and they know a lot about quality listening and performance levels.
In the other thread I posted what the Music Reference designer and manufacturer D. Berning found out when using fancy fuses in his amps/preamps that in a word makes the: damage.
Regards and enjoy the MUSIC NOT DISTORTIONS,
R.