The most important factor in soundstage imaging


Everybody wants a system that images well. There are  many discussions here positing equipment changes that will improve imaging. Some people think the magic wand is cables, others are sure it’s the preamp, and the ones that don’t think it’s preamps, think it’s amplifiers. And, of course, speakers are (correctly) mentioned. 

However, the single most important factor in audio stereo imaging, is increasing direct radiation and decreasing reflected radiation, by moving the speakers away from the back wall, and away from the side walls. 
128x128phomchick
@hifidream-  Thanks for the heads-up.  I don't use a server, but- I'm considering it.  I'll be looking into that software.
Everything is important, start from the fundamentals like power, from the transformer to the wires in wall, outlet, PC conditioning, components, IC,s , SC, speaker placement, isolation ect.

IT,S ALL IMPORTANT.

hope this isn’t a repeat, but I’ve found the most important factor that really kicked open the soundstage in my system, was placing speakers 28 feet apart, and 6 feet high in corners of room. the listening room is 28 x 14 feet, and the speakers on corner shelves special built for the purpose to exact dimension. the speakers project towards the other side of room, and the room has a vaulted ceiling that is 16 feet high on the sound receiving side. it is 8 feet high on the speaker side. what this does is create a HUGE soundstage on the high ceiling side of the room, and I can sit between the speakers and look at the high vaulted ceiling side and it’s like the band is right there in front of me, even though the speakers are on either side of me facing forward, the same way I’m facing. or, I can sit on the other side of the room, and listen to the soundstage between the speakers as is normal and traditional way of listening. if I sit on the speaker side, I reverse the speaker leads to keep it right and left, because otherwise I’m listening the music backwards in stereo. but man does this work good. I stumbled upon it by accident and luck, the house I bought in 1994 just happened to have a vaulted ceiling living room, with stairway on one side going up to loft. it’s sort of like sitting in a theater with the floor being and ceiling being tilted down towards the stage, but I can sit where the stage is, with speakers on either side, and look upward into the soundstage, and it is GIGANTIC. the soundstage is 16 feet high and 28 feet high. you gotta experience it to know what I’m talking about, once you hear a stereo in a room like, this, you’ll never listen to one again in a box room with flat ceiling.

another issue is, the stereo must be single ended dual monoblock, I've tested dozens and the push-pull can come close but not quite.  and the best single ended I heard was a 6bq5 tube, driven by 12ad7.  it really was the last gasp for single ended hi fi stereo, the best little high powered tube they made, before going to solid state in the 1960's,  a 6v6 just can't cut it.  the old 2a3, 300b etc. tubes are very sweet, but lack the bottom end power needed to play 1950 to present rock music accurately.  they end up thin sounding, but are great for light acoustical instrumentals and female voices.

I agree with tecknik and some others in regard to everything ultimately contributing. One thing that isn't mentioned enough is controlling equipment resonance. This ime cleans the stage up considerably. I've tried a lot of different things & currently use isoacoustics feet under all of my equipment. Each piece of equipment sits on it's own corian platform & each platform rests on ceramic balls. Although that probably seems excessive, the results are in the amp/preamp upgrade neighborhood.