Rydenfan, I have the same configuration as you (T2 on my source & T3 on my amp). For the Power Conditionner, I use the T3 which is perfect for this use. |
Jmo,
You have upgraded your Accelerator speaker cable to the Precision Reference. Which are the differences which you noted between these 2 cables ? I plan to make the same thing as you.
Thanks! |
Jmo,
Thank you for your comments. I will let myself try by the upgrade.
Thanks again. |
My sytem is all Synergistic Research Tesla and I am very happy with them. I would like to upgrade one or two cables.
What I have so far :
T3 power cord on Digital
T2 power cord on Preamp
T3 power cord on Amp
T3 UHC power cord on Power Line
Acoustic Reference XLR interconnect from Digital to Preamp
Accelerator XLR interconnect from Preamp to Amp
Accelerator speaker cable
I hesitate between replacing by Precision Reference line the speaker cable (my amp solid state 300W 4Ω 40A) or the interconnect from preamp to amp.
I do not know which with the most impact. Have suggestions?
Thanks again, |
Jmo, Istanbulu: Thank you for your prompt answers. I sent several emails to Ted Denney, of practice it answer me, but lately I did not have an answer.
Jmo, which you have of other IC's with your Precision Reference SC?
Istanbulu, I was very interested by PowerCell, but only comes with USA type of outlets, and I'm in Europe. |
Joeyboynj, Thank you still for your opinion, it joined that of others audiophiles & music lovers who like you had the possibility of tested. I will let myself try by the Precision Reference loudspeaker cable.
Thanks again. |
Istanbulu,
I had information by TCC that the PowerCell in 230 Volts for Europe had the outlets to the US standards. I undoubtedly will choose the upgrade of my speaker cable (Accelerator to Precision Ref) or perhaps the IC preamp-amp (Accelerator to Precision Ref). For the PowerCell I will wait until it is to CE standards for Europe. |
Joeyboynj, I will try on my system 1 pair of Precision Reference speaker cable, 1 pair of Precision Reference interconnect and 2 Power Cable's Precision AC and Hologram A for my amplifier, because my T3 sounds bright & fatiguing in the triples (I carried out several tests with my other Power Cable's before discovering that it was the T3 which did not function on my Plinius SA-201 amplifier).
I hope that the Precision AC will be appropriate and that it will not raise the triples. Hologram A is perhaps the best choice, but it is really very expensive.
I think of receiving them at the end of the next week. I will give my impressions of listening ASAP.
You have a very beautiful system. I am French, and I know JMlab very well. If you wish to make evolve, with your Moon Evolution i7, you would have great satisfactions with the Diva Utopia Be. |
Joeyboynj, Jmo, Istanbulu: I have just received several Synergistic Research cables for evaluation in my system.
I installed the Precision Reference speaker cable, and I join your comments and good advices on this cable. After only 3 minutes in the system (thus not settle-in), the sound is fantastic: 0 (zero) distortion, great extension of the band-width in bottom and the top, incredible dynamics, depth of the soundstage and placement of the very precise interpreters. It is the "real deal" for my system. Your recommendations were excellent. This cable is fabulous and makes huge improvements.
I will test the Precision Reference interconnect, Precision AC and Hologramm A in the week. I hope that they will be as gifted to make good music as Precision Reference SC.
:) |
Some one know if there is new Quattro of planned for this year? This model is oldest of the range and does not have to be replaced.
Thanks,
Jazz |
Anybody here did compare Acoustic Reference IC with Apex IC ? Which are the audible differences between these 2 cables?
Thanks,
Jazz |
Joeyboynj, thank you for your prompt answer. I am currently cabled with Precision Reference IC, SC, Precision AC, T2, T3 and Acoustic Ref IC, and missing me only information on the Apex vs Acoustic Ref IC for CDP to preamp. I hope that the Apex is not analytical, but sounds analogical.
You have to evolve with the JM Lab Electra 1027 BE, in gray they are superb, congratulations.
Jazz |
Thank you Joey. I will order an Apex to replace my Acoustic.
Jazz |
Hi Joey, When I posted my last message, the sound restitution of my cables were extremely warm.
They had approximately 200 hours, and then extreme warmth left and in this moment with approximately 260-280 hours they are rather neutral.
I will still await one can with the case or they would still evolve.
I think of buying Quattro soon if there is a new model evolved with a look like PowerCell.
Do you have information on the replacement of Quattro soon?
Thanks,
Jazz |
I have just placed my T3 on my CDP instead of T2 and I like much better. I have already an Apex XLR on the CDP to the preamp, a Precision Ref. IC XLR on the preamp to amp and Precision Ref. SC, I have also Galileo which I placed on my PR IC and obtained a better listening than on the Apex.
Anyone already compared the T3 to Hologram D on its CDP? Which are the differences? Is this a great improvement?
Thanks. |
Tbg, thank you to report your experiment. It is one can what I thought following the reading of the reactions of the other owners of Hologram D. In my comparative between T2 and the T3, the T3 is above T2, but it is not the day and the night.
I will order 3 more Galileo and surely 1 Hologram D. After an Apex IC and 1 Galileo last month, my banker surely will kill me. |
