Subwoofer Crossover Question


What would be the starting point for Subwoofer integration with a pair of speakers that has the Frequency response below. Any layman explanation for what the -6db at 23Hz signifies and how this might relate to subwoofer crossover into a two channel music system, (two Rel Strata III's) will also be appreciated.

Frequency Response 28Hz to 25kHz ±2dB, -6dB at 23Hz
Ag insider logo xs@2xmattkimb96

Showing 3 responses by jjrenman

Newbie,

You make some excellent points but the spec on his speakers
are +/- 2db down to 28hz so they could not be down 6db at 32hz.

With that said I concur with your following statement.

"Not what you want to hear perhaps, but if your speakers are only down 6db at 23hz I question the value of using subs at all."

OTOH, if the OP uses the speakers for Home Theater or listens a lot to organ music.....

At this point it would be helpful if Matt would tell us what he feels is missing.
When a spec states something as + or - 2db it means that a product (speakers in your case) will only increase or lose volume by the specified 2db between the lowest and highest frequency's stated. So in your case, between the very low frequency of 28hz and the very high frequency of 25khz the speakers will only add or subtract 2db from the music sent to them.

DB's or decibels is a measurement of volume or loudness. 1db is considered the smallest amount of change in loudness that humans can hear. However in practice 10db to most people sounds like twice as loud. So 6db would be half way.

If you have ever messed with something that has traditional bass and treble knobs, 6db would be the same as turning the knob about half way.

HTH.
I just looked at Matt's system and he already HAS the REL's, he's not looking for advise on if he should add them to his system. I apologize for my misunderstanding the question.

So at this point it would be helpful to know how the subs are currently hooked up.