2. tech-talk
  3. 151635-74636

Speaker kits recomendations Maybe Horn TL hybrid lets talk speaker kits

After reading many threads on speaker building ( you guys sparked my interest thanks) I'm interested in putting together my own speakers for a second system. this is for pure fun and saving money is nice as well.

I do not have full wood working facility's so it will have to be a flat pack type of build. Pre cut cabinets may be the ticket, as I am not a wood worker by trade  ( Aircraft Tech, Electro Mechanical, minor in Electronics and Engineering are my background ) but I do have access to a wood working shop co-op on the military base for finishing. 

I've been reading the various speaker kit makers, Fugalhorn, Moral audio, Madison sound, part connexion, fostex, ect. so I'm familiar with some of the main sites. Are there kits I'm missing? What do people recommend for kit manufacturers? Obviously I need to decide on a design I'm trending to a Horn-TL hybrid but I'm very open to suggestions.  I own MTM's as my main speaker so I'm aware of what that design can do as well as most 2 way designs I think I'm looking for something different though. preferably higher up on the efficiency scale as I'd like the option to use lower powered amps but not necessarily a must. I'd even consider powered speakers. 

Do you know of a good horn loaded kit? Horn TL hybrid kit? or do you have something totally different that may spark my interest. Subwofer is something i'll do next I think we will see. 

 This is a fun project for me but still wanting good sound from the finished product. Cost is not really a consideration I'd tend to spend a little more for better quality parts but I'm open as this is my first build. lets keep it under $2k but in no way do I need to spend that, couple hundred is fine for a good end result too. I know first time I should buy cheep but then I'll have a speaker I wont use so may as well take my time and do something worth having in the end. 

I'm open to suggestion if I'm thinking down the wrong path. 

Glen 
glennewdick

Showing 2 responses by pragmasi

pragmasi
212 posts
 
I know you're looking for a flat pack solution but if you could get a carpenter to make up the cabinets for you there are some great designs on the Seas website. I made the A26 as an experiment and was blown away by the cost/performance ratio.
I've also been meaning to make some LXminis but not got around to it yet, there are several well regarded designs on Siegfried Linkwitz's site.
pragmasi
212 posts
 
For a first build the A26 speakers are about as simple as you can get, there's no crossover to speak of (just a high pass on the tweeter) and it's a straight forward box. For the cabinet work I get by with a Makita SP6000 for cutting down the boards, a router with a circle jig and a hand drill. If you can get access to a table saw etc. then even better. 
Ply is a good idea, just remember if you use a different thickness board keep the same internal dimensions so that the air volume is as specified. Seas are great drivers but I don't know how easy they are to source in the US, another great resource is zaphaudio.com, Zaph is very well regarded in the DIY world (I think he may have designed some of the Madisound kits too).

My only other advice is don't get too lost in the world of 'high-end' capacitors and the like... strangely the more you spend the less technical information you get about the capacitor's properties. Have a look at the components Zaph uses and go along those lines.
More to discover