Speaker cables for Von Schweikert VR5SE


I'm interested in learning what others have used for cabling these speakers. Since this speaker has two modules, each with its own speaker terminals separated by some 24", VSA strongly recommends running two separate pairs of cables - one to each module, though it's obviously possible to use one regular pair of cables in conjunction with a lengthy jumper pair to connect the modules or an internal biwire with extra long tails.

Right now, as I am breaking the speakers in, I'm using two pairs of my own basic 12g cable, self terminated with spades, and they sound pretty ok with my BAT VK500 but I'm going to get a neater solution in due course, even if it's only a pair of cheap Cobalts or Anti Cables. So, if you have these speakers and have found a particularly good match, let me know. Also, if you have run them with jumpers rather than two pairs, I'd be keen to learn if you thought this better or different.
oscar44

Showing 1 response by runemigge

I thought the VR4genIIIHSE sounded more whole and integrated with 2 same lenght cables to top and bottom than with the jumper, more natural sounding in my view.

I do think many cables are hyped and overpriced and in my opinion one can DIY good cables.Check what VS writes about difference between solid core,multistrand,copper and silver,and I say thats very similar to my own conclusion.I also like to use natural material around the bare cables,like for example cotton sleevings.There is never one right cable for all set-ups,its all about matching so try different things,but usually if you find out what VS use as internal wiring that will in my opinion almost always be a good match.

Cheers,
Rune