Speaker binding posts with plastic covers


My Krell amplifier has speaker binding posts with the clear plastic covers. Apparently these are for EU safety requirements. I want to use spade connectors and have no idea how to open these covers. I’ve wrestled with them but they don’t budge. I don’t even know whether they unscrew or pull out or whether there is some other method at play. Does anyone have experience with these?

 

 

rfprice

Showing 6 responses by elliottbnewcombjr

These 5 way binding posts unscrew (the type you and others are thinking of),

  • Accepts up to 8 AWG wire, banana plugs, forks, spades, and speaker pins

they are ’mini’ size, smaller outer diameter to fit where/when nearby obstacles prevent the larger outer diameter of standard ones.

not sure, your spades might be too large for these mini sized ones.

IF your speaker cables are expensive, the connectors on the Krell could be changed

 

They DO NOT unscrew! You CANNOT use spades with these.

The crimper is for the bare end of a multi-strand wire. It ’melds’ (by crimping pressure) the individual strands into a semi-solid strand to then insert (like a banana pin) into the connector. (cut your spades off?)

there are two torx set-screws on the side of the connector. Tighten them to hold the now crimped wire end within the connector.

To remove wire: simply loosen the two set screws.

The solder is for the other end, inside the enclosure before tightening in place. You can solder the wire end after crimping it if you want to.

.....................

This $12. gizmo looks a whole lot like their $166. crimper

https://www.mscdirect.com/product/details/28718872?cid=ppc-google-&mkwid=%7Cdc&pcrid=&rd=k&product_id=28718872&gad_source=1&gclid=CjwKCAiA1MCrBhAoEiwAC2d64bb0AcvdS-hT1LOT4TEWddemjOD_s_RomLrA7dEcAjJwf2QyKXzsLRoCgzYQAvD_BwE&gclsrc=aw.ds

 

people are telling you their experiences with their connectors that do unscrew, like mine .....

the type you posted DOES NOT unscrew. read the full description

 

 

another spade to banana adapter, 

 

 

imhififan

yes, you show a type, like mine and most, that does unscrew, and perhaps all the way out is a possibility, that would be the definition of dumb luck.

The link OP posted,

 

perhaps he just thought they all looked/worked the same, so he just posted that one, it just happened to be the rare one that does not unscrew.

IF this goes on any longer, we will need a photo I think.

 

rfprice OP

well, considering that they were 'frozen', it's a good thing you asked/solved it before throwing the Krell in the bin!!!!

happy listening.