So I was changing a lightbulb last night…


I had just finished listening to a record and decided to change a lightbulb that had gone out directly above my turntable. When I started unscrewing the bulb I noticed a faint buzz coming from my speaker. I then turned the volume way up on my amp and tried again. Turns out the buzzing was happening when my hand touched the metal light fixture, not the lightbulb. 

At first I thought the tubes in my phono stage were picking up an EM field from the light fixture and out of curiosity I grabbed a piece of foil and covered the phono stage and then tried tapping the fixture again, same buzzing. Then I switched the input on my amp to my DAC and tried the tapping, no buzzing. Switched the input back to the phono stage and tapped the fixture, buzzing continued. Then I covered the tonearm with the foil and the buzzing went away almost completely. 

So it appears my tonearm is picking up some sort of signal from the light fixture but only when I touch the fixture. If I turn the lights off there is no buzzing when I tap the fixture. The setup is in the basement and I use LED lights that are recessed in the ceiling and wired to an “LED” dimmer switch. The audio gear is on a dedicated circuit.

Any of the knowledgeable folk on here have an explanation for what’s going on? Doesn’t effect SQ AFAIK since the buzzing only occurs when I touch the metal fixture. Seems odd but I thought it was interesting and maybe a chance for me to learn something from the members. 

I uploaded a video of this happening to Imgur that I’ll try pasting here:   
 

 

Cheers

durte30

Showing 1 response by buellrider97

    +1 @erik_squires , I had to laugh as it reminded me of my childhood days when dad said “ Hold the TV antenna “. EMI, capacitance, and electrical conduction all come into play when we place our body in the circuit. I’ve removed dimmer switches, flouresent lights and added additional grounding and shielding as I’ve progressed with my modest system. Battery powered lights and fans are a plus too, as already mentioned. I’ve gone so far as to try late night listening and turning off most of the breakers on my panel to seek noise reduction. Happy Listening, Mike B.