2. amps-preamps
  3. 153960-1009

Smoke on my power amp

I was listening the music with the right speaker wire detached to listen to the left speaker alone. The speaker wire was still attached at the amp side. My preamp does not have the balance knob.
After 20 secs or so, there was a smoke on my power amp.
I quickly turn off the amp.
Once smoke comes, would it be safe to turn it on again? I wonder whether it is permanently damaged.
Is it not safe to listen to the music with the speaker wire detached from one speaker but still attached on the amp side?
My amp is Plinius SA 102.
Any comment?
thx


128x128ihcho

Showing 2 responses by rocknss

rocknss
130 posts
 
I would just try replacing the output transistors myself.
rocknss
130 posts
 
If you can get the parts and want to try it yourself.

After detaching from the heat sink, first cut the leads near the body of the transistor and then desolder/remove one at a time. Use some solder wick to clear the through-holes. 

Cut the new device leads to the same length as those removed and form similar, then solder in place.

Looks real easy to do right from the top.
More to discover