Dekay, You could purchase silver cable 99.999% from homegrown, to use as a jumper. They would know what to advise you to purchase and the best way to do it. Larry
Simple Question. Simple Answer?
Istead of using jumper cables on my bi-wireable speakers I stripped 3" on the ends of my Kimber cables and ran them through the LF post and on up to the HF post. I took the flat connector plate off. Did I do the right thing using one unbroken wire to complete both circuts? Would making a seperate jumper from the same wire sound better, worse or the same? I could try it of course but this would require stripping an additional 32 individual wires. I did it with a medium sharp box cutter before because both of my strippers had a tendancy to damage some of the individual strands, it took a long time and that was for only 16 wires. I have read previous posts on the subject but they do not address the one wire method that I used. I would also be up to trying a seperate silver wire jumper if I could make it myself on the cheap. Could I use a solid core silver wire for this in one run with no insulation or connecters? If so what gage would I want to use? My mono amps for bi-amping did not come in on a shipment as expected so I would like to experiment with this in the meantime. This is why I would rather put more thought than money into the project other than the fact that I am cheap. Thanks.