2. tech-talk
  3. 1356742808

Simple Amp Repair in Houston

I'm on the south side of Houston and looking for someone who can do what should be a simple repair to one of my monoblock solid state amps. It appears that the resistor between the + & - binding posts is failing or the solder joint is bad. Probably a simple repair if you know what you're doing, but I don't have confidence that I know what I'm doing! Any guidance here is appreciated.

Thanks,
Bobby
countrysquire
4 responses Add your response
countrysquire OP
4 posts
 
The sound is either on or off. The binding posts are WBTs and are tightly mounted on insulating blocks, so I don't think they are shorting against the chassis. Thanks.
csontos
1,311 posts
 
You need to expand your description of the sound you're talking about and where it's coming from specifically. If the binding post is loose, it may be shorting against the case. I would not turn this amp back on until I corrected the problem. Right now it sounds like a minor problem. Take it to a reputable tech/shop in Houston before it becomes a much bigger one. Probably cost little to fix.
countrysquire OP
4 posts
 
With the cover off, looking at the negative binding post while moving it from outside, you can see a bit of movement in the resistor's lead which causes the sound to come and go. Touching the resistor with a probe does the same thing.
csontos
1,311 posts
 
How can you tell?
Log in to respond
More to discover
80x80
Aurender N100H
FREE SHIPPING!
80x80
Ayon Audio S-10IIxs
80x80
Wisdom Audio P20m