Siltech G5 range compare with Stereovox Reference

Hi Chris,

I'm using Raul Iruegas' Essential 3150 from an Ikeda tonearm and so I'd need a 5 pin Din to two XLRs phono cable. Would a custom made 2.5m length of your BAL600 cable be a possibility?

Thanks again

Hi Dgob,

We do phonocables with XLR terminations as custom products for Continuum Audio Labs. The only phono stage I know of that has XLR inputs is the Boulder, for which we've made a couple of phono cables for past clients.

Hi Chris,

Many thanks. Do you do phonocables with xlr termination?

Hi Desmond - sorry for the late response. According to feedback and experience: Stereovox cables need about 50 hours to get 80% of the way through break in, with 150 hours to settle the rest of the way.

Chris,

Many thanks. Mine are the SEI-600s. How long would you think they need to break in fully as they seem to present a slightly bright and etched presentation at present?

Many thanks

Desmond

Hey Guys,

Just wanted to help here. The new Ref series has two single-ended cable in the lineup: SEI-600s and SEI-600II

SEI-600s is a twin-breakout of two coaxials that are made from the core coax within the SEI-600 original. Thus, the sound of this cable will come closer to the sound of the original SEI-600 because everything is the same except for the connector (which is built the same way, just more termination friendly) and the fact that the secondary shield is not there. This is useful in a rack situation where components are relatively close to one another. As this is a stereo-breakout cable, it's not necessarily the best solution for monoblocks. ;-)

SEI-600II combine the twin coaxes in parallel, summing shields to shield and signal-conductprs to signal. Lower resistance, half impedance, half inductance. This has a very different sound from the original and the 600s. This is a very excellent cable for runs out to monoblocks, but many prefer its sound in the short-run through the rack as well.

Hope this helps!

Chris

Oneprof, I've got the new Stereovox with the rounded termination. What differences do you detect in their sound?

I'm becoming slightly more familiar with the Stereovox sound and so feel a little more certain of their distinction from the top of the Siltech G5 cables (the SQ110) but would appreciate other views or suggestions on other interconnects.

Many thanks

Dgob, just curious, did you buy the 'old' Stereovox--the SEI I's--or the new Stereovox--SEI II's? You can tell by looking at the Xhadow terminations, the new Stereovox SEI's have round termination,the older ones have square ones. I ask because I've had both new and old Stereovox, and while they have a 'house sound', they don't sound identical.