The azimuth ring is for fine adjustment, for coarse azimuth adjustment, you have to move the counter-weight side to side. This is made tremendously easier with a SS counter intuitive weight, as someone has already mentioned. Otherwise, you will almost certainly affect the tracking force when you loosen the counterweight.
Setting Azimuth
Details:
VPI Scoutmaster
JMW 9 standard tonearm
Soundsmith Zephyr cartridge band new
Using a Fozgometer and Hi Fi News Test LP both also brand new
I'm measuring at the interconnects off the turntable.
I cannot seem to achieve a proper azimuth that will give even channel balance. The only adjustment on this tonearm is the counterweight which is weighted a the bottom so turning it side to side should effect azimuth. Only extreme changes are affecting channel balance. I changed the interconnects in case they were causing the problem, but I get the same results. The right channel is a few decibels louder no matter what I do to the azimuth unless I make an extreme adjustment which has the tonearm cocked to one side and obviously this is not correct.
VPI Scoutmaster
JMW 9 standard tonearm
Soundsmith Zephyr cartridge band new
Using a Fozgometer and Hi Fi News Test LP both also brand new
I'm measuring at the interconnects off the turntable.
I cannot seem to achieve a proper azimuth that will give even channel balance. The only adjustment on this tonearm is the counterweight which is weighted a the bottom so turning it side to side should effect azimuth. Only extreme changes are affecting channel balance. I changed the interconnects in case they were causing the problem, but I get the same results. The right channel is a few decibels louder no matter what I do to the azimuth unless I make an extreme adjustment which has the tonearm cocked to one side and obviously this is not correct.