2. analog
  3. 1351851496

Screw-down reflex clamps vs. record weights

Recently we have seen more and more 'record weights' on the market. These are normally lightweight(300-400gr)and simply sit on the record. They do not appear to give priority to bonding the record to the platter.
Two outstanding record weights of this type are the Kuzma Ebony Record Weight and the HiFi Tuning VRO ('vinyl resonance optimiser') - there is a review of this(for those who read German) at www.fairaudio.de.
It appears that these clamps, rather than channelling disc resonances away through the spindle and main bearing and/or optimising contact between the record and the platter surface, seek to absorb them directly (i.e. into the clamp itself).
The Kuzma Ebony is a particularly interesting case since it has been introduced by a company that supplies screw-down reflex clamps as standard on its high-end turntables.
My question is: has anybody had any experience of these clamps - probably 'vinyl resonance tuners' is a more appropriate term - on their turntables as replacements for screw-down reflex clamps? Clearly as a way of dealing with warped or dished records they will not be of much use, but it may be that they do a better job of damping the disc.
I would be particularly interested to hear of experiences involving SME turntables (whose platters incidentally are covered with a bonded layer of 'Isodamp' damping material).
Thanks,
Peter
pgtaylor

Showing 1 response by tonywinsc

tonywinsc
583 posts
 
For clarification, I want to point out that the washer used with the Sota Reflex Clamp is made of felt. When I bought my Sota tt and clamp many years ago, it came with two or three of these felt washers. As mentioned, the washer makes a big difference in coupling the record to the platter with the reflex clamp. As far as I can tell my platter is flat, except for the slight relief near the spindle that is about the same diameter as the record label. The Sota reflex clamp flattens the record out to the outer edge with the felt washer under the record. Without the felt washer, I think the record would dish when applying the reflex clamp.
I have a couple of records with funny warps that make the outer edge roll up on one side when I clamp them down, but they are coupled to the platter the rest of the way in. I experimented years ago with and without the clamp. I don't remember hearing a big difference, but I use it everytime because many records will not lay perfectly flat on the platter without it.
More to discover