my calculations show room nodes too close together at 7&8 and 15&16. If your measurements are correct you will need to correct for the like node cancellations that will occur at the noted points and others will likely occur in your seating position. otherwise my only comment is, that is a sheet load of speakers for such a small room and should likely give you some pretty incredible theatre sound and overload + room resonance galore! Go three channel + subs trade one set of speakers in for some tiny ceiling mounts and save some precious space.
AudiogoN post set up will not allow for my chart to post properly so each line has a accendinghz and differential value except the last doesn't have a differential. Length has 7 values, width 6 and height 4
Length Width Height accending differential
14 12 8 order
40.35 47.08 70.62 40.35hz 6.72
80.71 94.16 140.54 47.08hz 23.54
121.07 141.25 210.82 70.62hz 10.08
161.42 188.33 281.09 80.71hz 13.45
201.78 235.41 94.16hz 26.90
242.14 282.5 121.07hz 19.47
282.5 140.54hz 0.70
141.25hz 20.17
161.42hz 26.90
188.33hz 13.45
201.78hz 9.035
210.82hz 24.59
235.41hz 6.72
242.14hz 38.95
281.09hz 1.40
282.5
AudiogoN post set up will not allow for my chart to post properly so each line has a accendinghz and differential value except the last doesn't have a differential. Length has 7 values, width 6 and height 4
Length Width Height accending differential
14 12 8 order
40.35 47.08 70.62 40.35hz 6.72
80.71 94.16 140.54 47.08hz 23.54
121.07 141.25 210.82 70.62hz 10.08
161.42 188.33 281.09 80.71hz 13.45
201.78 235.41 94.16hz 26.90
242.14 282.5 121.07hz 19.47
282.5 140.54hz 0.70
141.25hz 20.17
161.42hz 26.90
188.33hz 13.45
201.78hz 9.035
210.82hz 24.59
235.41hz 6.72
242.14hz 38.95
281.09hz 1.40
282.5