Also today audio flows through integrated chips with incredibly small parts, plugins run audio through digital hoola hoops everyday all the time on every piece of music recorded with modern equipment. Chips are the best way to handle audio and the most dependable, why because all you have to do is be careful of the quality of the power supply the chips will always act the same. In the future sound systems will come in a chip and the silly discussions abut audio cables will filially stop.
|
i was just talking about replacing ribbon connectors with chips. For your imagination, no separate electronic boxes at all only speakers, yes you will have to plug in your speakers but by then people will realize that AC is changed to DC and that very simple circuit is easy to design and doesn’t take an expensive AC cable. All controls will be on apps and the generic speakers will be controlled by signal and powered chips If you want to get better sound than everyone else you just pay for a more expensive app and better DSP. The future of the audiophile equipment lover is not so exciting. In the pro world already it’s not the hardware you have it’s the plugins. |
@invalid Yes bars for the output stage just like a real power plant. Just before WW2 the big power plant at Hermosa Beach Ca had the main output bars replaced with pure silver bars so if the Japanese did capture California they wouldn't get so much silver, just a note that one of the managers told me while we were filming in the building. I'm talking about the wiring inside your amp or control amp or DAC that has a several thousand dollar cable plugged into it from the power conditioner or the wall, In the metal box the power goes to a fuse and a switch which then probably to a transformer but isn't made with nearly the same cable material or scientific geometry as your power cables. Inside the equipment box is very high current sections very close to very low current sections, DACs have RF hell all over the place thus separate sometimes 4x boxes for the equipment. Why don't eqipement companies use even ¼ as expensive of internal cabling as the normal hi end audiophile people do? |
@audphile1 This subject has been a problem for me for literally almost 40 years. It is not true that audio doesn’t follow ribbon cables, it is true that power both AC and DC moves through ribbon cables and board tracers. I have been in the situation of having to stop a company spending 2000 dollars a minute to replace equipment while 150 people and actors making millions go back to their trailers until i’m done because of ribbon cables nearly 100% of the time. My notes here and on other threads are to show that when people can’t see the cables they are made cheep even when your equipment is a 200k piece. The problem with ribbon cables is plentiful the biggest problem is the connector it connects two parts of a system together and that is where movement comes from and because the ribbon cable connectors are all very poor that is where problems are. I’m sure there are electronic techs on this forum that will affirm everything I’m saying. Cables inside of audiophile units are good cables but they are not an inch think and shielded with five levels of shrink-wrap and fancy colors. Good connectors make much more of a difference ask any professional sound person, there are some on this forum. |
