Revel Studio Discussion- Everything Studio Here

Thanks for the reply and email Raquel
I am going to look for that series of kimber
i am currently running bi-wired so the jumpers will be a must!
Any ideas on room placement for these monsters?
I have a very strange dedicated listening room/ht
i will attempt to draw it out and see if anyone has any thoughts.
i just spent 3 hours scouring the net for advice and trying to implement it to no avail (ie no huge difference in sound)
the thing that i have been surprised by is the lack of deep bass slam i was expecting
i have a rel storm iii sub so it is not that big a deal but in dedicated 2 channel listening, i can thelp thinking that i shouldn't need it
plus my wife says the rel bass sounds bloated in comparison

Front Rear

*****************
*equipment racks*
* ************
s *
c # ************
r *
e *
e # *
n *
* *
* *
******french doors*********************

approximate dimensions are
screen wall (widest) 17 feet
maximum length 22 feet
length to first 2 foot cut in on right wall - 10 feet (equipment rack are)
length to next cut in = 8 feet
ceiling height 9 feet
now i have 2 sets or risers with 4 cinema loungers each
first riser is 4 inches high and 15 feet back from
screen wall (middle 2 seats here are "mine"
second riser is 12 inches high and 20 feet back from
the front screen wall

the studios right now are 54 inches from screen wall
the left studio is moved into the room from the side wall by about 5o inches
the right studio is about 65 inches in from the wall behind the equipment rack
the speakers are about 11 feet from the primary listening position
and are about 8.5 feet apart from each other
i think thats about it
please feel free to post with further details
i have got to get these things placed optimally!
thanks in advance everyone!

Dear Dp37:

Here is a link to a thread I posted about placing my Salons. Hope it helps:

http://forum.audiogon.com/cgi-bin/fr.pl?cspkr&1054732329&openusid&zzRaquel&4&5#Raquel.

I am running a ht system with Studio's, Voice and Embrace
for surround. Revel sub-woofer delivers kicking base. Powered by Bryston 14b SST and Krel KAV 3250.
Lexicon mc-8 balanced and RT-10 on the front-end. Cabling is pure note cerulean which I used to replace transparent ultra and ultra xl. Sound is awsome - my wife constantly makes me turn down. Have thought about replacing the RT-10
with something else. I heartily recommend the Revel Studio.
Pure note makes a great companion to these speakers.

Great thread, thank you everyone.
I'm just about to purchase some Studio's to use with my Pass X350, Exemplar modified Denon 2900 and EAD 8800Pro processor/pre amp.
Now all I need is some cables to tie it all together.
What cables work well? My bank account has taken quite a bit of a poundiong lately so I'd rather not go mad and a full set of valhallas!

Do the cheaper silver cables like Pursangs, Bogdans, RSAudio ect work well with Pass/Revel speakers or should I look for something warmer sounding?

I'd love to use my existing cables but they are all 1m unbalanced cables and I now need 2m balanced for the pre-power amps so I need to buy something to make it all work.

I read the Kimber select silvers were used in voicing the speakers but these are out of the question price wise for the time being.

thanks in adv. Ian

I highly recommend Audience AU-24. Don't let those little things fool you- they kick ass!