Rega Planar 3 : Heavily upgraded yet produces a sound that I don't like
I have the Rega Planar 3 turntable for 30 years now. It had
an original everything including a 100$ nottingham analogue cartridge/stylus.
Sound was not bad but pretty basic....
A few years ago I started upgrading it. I did all the
upgrades together and the result is... not good. The sound is very accurate but it is too bright, there is almost no
Bass and drums have no attack whatsoever.
I can't eliminate where the problem is because all upgrades
are irreversible.
I know that the
Ortofon Rondo Red has a very bright sound but still...
Here is a list of the upgrades :
1. ISOkinetik ISOvert Rega Tonearm VTA Adjustment Kit
2. Cardas Litz purple phono cable
3. ISOkinetik Tonearm Low CG weight
https://www.analogueseduction.net/isokinetik-upgrades-and-parts/isokinetik-isoweight.html
4. Ortofon Rondo Red Cartridge/stylus
5 Linn Linto phono pre amp (an old but outstanding piece which has a cult following).
6. I use Rega Elicit Apmplifer
Showing 2 responses by mijostyn
I was not aware the Rhondo Red was a moving coil cartridge. At this price point you are much better off with a Moving Magnet cartridge. As an example you find the Gyger S stylus, perhaps the quietest tracking stylus made in the $17,000 Clearaudio Goldfinger MC. You will find the exact same stylus in the $600 Goldring 1042 MM and a similar stylus in the Audio Technica VM760SLC for $600. |
You changed the cables and might have a capacitance issue. MM cartridges are very sensitive to capacitance and the wrong capacitive loading will change the high frequency balance. You have three variables you can play around with, the cartridge, the resistance load and the capacitance load. You can "tune" your high frequency response this way. I always shoot for the lowest capacitance in cables and usually play around with resistors first. Your load now is probably 47K ohms. Read this article https://www.tnt-audio.com/sorgenti/load_the_magnets_e.html A word of caution. When people note a bright sound this usually means a peak between 6 kHz and 12 kHz. Most people will not hear a peak at 20 kHz. Even a peak at 16 kHz might not be perceived as "too bright" but rather as more detail which some people like. It gives you that surrealistic Hi Fi sound. |