Try unhooking the digital cable TV connection and see if the issue goes away. If so, you need some type of an in-line isolation transformer to get rid of the noise.
Receiver too Integrated amplifier
I have had trouble currently and in the past with 'noise' coming through my speakers when using a SimAudio i-5 integrated amplifier in conjunction with a home theater receiver via analog pre-outputs. The Moon has HT By-Pass on input 4.
I had an annoying hum between the two components so I bridged the two with a line level isolator. However, there is still very faint static coming out of the left speaker whenever a signal is input (Blu Ray or Digital Cable). Listening too two channel = no noise. Turning off the receiver and keeping the SimAudio on the same HT By Pass input there is no noise, it is only when the receiver is on.
I've run out of ideas on what it could be. Any suggestions would be most welcome.
I had an annoying hum between the two components so I bridged the two with a line level isolator. However, there is still very faint static coming out of the left speaker whenever a signal is input (Blu Ray or Digital Cable). Listening too two channel = no noise. Turning off the receiver and keeping the SimAudio on the same HT By Pass input there is no noise, it is only when the receiver is on.
I've run out of ideas on what it could be. Any suggestions would be most welcome.
4 responses Add your response