"Wall Wart" hum, unavoidable?


My problem is this: I have a Magnum Dynalab MD 102 tuner
with the analog remote control. The remote control "receiver" is connected to the tuner and is powered by a wall wart. After only an hour or two of operation, the wall wart produces an irritating hum which is loud enough to ruin
listening sessions at lower volumes. Can this problem be fixed? Have any others encountered this problem? Thanks.
ajm29a468

Showing 1 response by hwdsound

I just spoke to the factory about your hum problem.
They did have a bad batch of wall warts that over time,where the winding inside the wart(transformer) would loosen and starts to hum. The warmer it gets.....the hum gets louder.
They recommend to send the remote unit back to them so they can rectify the problem and in the mean time put the 7 pin din plug back into the socket on the rear of the tuner. If you lost the plug, they will send one to you.
Ask for Larry or Vince at Magnum Dynalab .
Tel#905-791-5888
I hope this will help you out
Best regards
Larry/Hollywood Sound