2. amps-preamps
  3. 1294988620

Putting a "pre-out" to use to get more power??

I am considering using the pre-amp out of my Creek 5350 integrated to use the pre-amp section with a better amp with more power than the Creek SE5350 Classic The question is whether the pre-amp section of the Creek is good enough to accomodate a better amp. I realize that the amp may provide a marginal difference in the sound, or its performance degraded if the pre-amp is not up to task with the outboard amp. I also am concerned about possible hum. There are a few used Quad 909 amps which might provide upgraded sound. I don't see many posts from members who use the pre-amp section of an integrated to control an external amp. This might be a waste of time and money than just going with good separates, or a very good IA. All opinions welcomed..... ****(I hope the Creek pre-amp out is not just to use with a subwoofer
sunnyjim

Showing 2 responses by elevick

elevick
2,638 posts
 
Stanwal gave great advice. Creeks have great resale value. Sell for separates?
Also, keep in mind that doubling your power will only gain you about 3db. If you need more power, that may not even be noticeable. You need to go up about 10db to double the perceived volume.
elevick
2,638 posts
 
It's funny, I was thinking MF gear and then read Stanwal's follow up. Big speakers in a small room will always cause issues with imaging/soundstage. You may have to keep trying with layouts. I've never felt that Creek was "edgy". A cheap fix may be an MF tube buffer? Normally I'm not into muddying up electronics but it may be helpful?

My only other input is new speaker cables do take a lot of time to burn in. Most of what you will buy, if new, will disappoint you at first. That's why I'd only buy used.
More to discover