PS Audio PWT - cd transport


Category: Digital

When I first saw a picture of the PS Audio PWT transport I did not think too kindly of it, as it appeared to be formed plastic but with reading the PS Audio website info on it, it made good electronic sense to me.

Reading the disc via a ‘read till right’ program – in other words, it does not automatically implement ‘error code correction’ (ecc) programming when misreading a disc, instead it reads and rereads the disc up to 100 times (not utilizing the drive cache) before resorting to ecc. Once this data is extracted from the disc it is sent to RAM memory where it is stored for a brief period. This middle storage point separates the disc from the transport’s output, thereby allowing for rereading till right data (explained above) and eliminates timing errors (by reclocking the data from this point forward, instead of using the clocked data stream directly read from the disc). This memory buffer does not manipulate or change the disc data at all – it’s still what was on the disc, only now more accurate in content and more accurate in timing. This is the data output.

Anyway, after being explained this info by Paul McGowan and Ryan Conway, I was intrigued enough to buy one. First off, I can say that I pleasantly surprised and happy to report that the transport is not made of plastic, its either aluminum or steel, and it is heavy and well damped. But, the remote is made of plastic and is pretty cheap feeling – oh well. There is no buttons on the unit, all input is either via remote or via a touch screen on the unit. The touch screen is a nice touch (couldn’t resist;) – it allows for operation but also displays disc title and song name with album cover art (if the unit is connected to your internet).

But enough with the side show stuff – what does it sound like? House keeping first - I have about 348 hours on it now, it sets ontop of Symposium Rollerblocks,, I’m using a Grover Huffman Sc AES/EBU digital line to my custom Audio Note DAC, and I’m using an Grover Huffman Sx power cable. The rest of my system consists of Atma-Sphere MP-3 pre and MA-1 amps and Quad 988 esl’s. This consists of the base line and comparisions are made against a Accustic Arts Drive 1 mk1 transport.

Now then;

Most obvious is a total lack of digititis – no etching, no “over emphasized” sharp edges, no glare. Instead, you get a VERY organic sound, but mind you, it’s not bloated, softened, or rounded – the best description is ‘natural’. Significantly more liquid than the Accustic Arts.

A dramatic increase in soundstage and dimensionality. Instruments are spread out with plenty of air and space around them. Open air, breath. Whole stage depth presented. Much more extension in my sound stage width, now uncannily extends beyond the sidewalls.

Articulate and detailed, but again no etch or glare. Fast. Slam. Tight. Rhythmic. We have moved beyond toe-tappin’ and have entered the butt shakin’ realm. Very lively. No fatigue.

All is well extended in both directions, bottom to top. Nothing is bloated or sharp. – sonically very clear and focused. Micro and macro detail is really expressed nicely. But, the noise floor is bit higher than the Accustic Arts – not a totally “black” background. Lastly, on very busy passages, I detect a bit of grain – only on pieces very busy with treble (concurrent multi cymbals, highhat, triangles, +).

Putting it all together - Horns, bongos, vibes are holographic / 3 dimensional. Brass horns are “brassy” but not bright or shrill, instead mellow and sexy. Cymbals are crisp and have realistic brassy lingering overtones. Toms and snare are stout. Strings are beautiful and radiate mellow woodtones. While bass is deep and distinguishingly tonefull. Woodwinds are richfully hollow and resonate, Voices are lively, relaxed, and human. Again, my notes continuously go back to “organic” and “natural”. Very ‘smile on your face’!!!

Overall, I find myself really amazed. The PS Audio is literally 1/3rd the price of my Accustic Arts but is truly much more musical. Personally, I think it’s power supply could be cleaner but this does not distract from the organic sounds elicited – actually reminds me of good analogue. The PS Audio is without a doubt a giant-killer for its price-point and I feel I can recommend it without hesitance.

I am wonderfully happy with how well it has synergized and complimented my custom Audio Note DAC. Lastly, I should note, the PS Audio has read every disc I have placed in it without a single stoppage -- can't say that with Phillip's drive based transports.
128x128grateful
Grateful,
Your review is well written and comprehensive in articulating it`s many good quailities. As I`ve told you on another tread your genuine enthusiasm and detailed insght really did stir my interest.I`m sure your music enjoyement is at an all time high, given your system you`ve obviously put in the time, effort and research to reach this point. Two other audiogon members Srg(who prefered the PS Audio duo over his M. Levinson gear) and Rogerwalk who did keep his Forsell transport but upon further review felt the PS Audio came quite close ( but not better). I`m eagerly awaiting the delivery of my PWT.
Nice reveiw. I agree. Here is some new info that can help out PWT owners.
Perfect Wave Transport Update

I just installed the Perfect Wave Update from PS Audio this weekend. It was well worth purchasing an SD cardreader and the few minutes it took to install it. Witht this update, the PWT can play FLAC, hi def WAV files, and I believe several others. I believe it also fixes the track counter issue and the fading display.
Besides, I can't swear to it, but it seemed to sound better too!
Contact PS Audio, and they'll send you the files.
Hi all,

Did not want to start a new thread, so this one looks as good as any!

Anyone else using the PWT WITHOUT the PWD? I am getting a new DAC soon and am interested in using a PWT but would like to hear from others that the unit works just as good without its DAC counterpart and without using the i2s connection...
I did read a review where the reviewer thought his top-shelf cables through the aes/ebu connection beat out the i2s connection.

If you are using the PWT with a DAC other than the PWD, please let me know what you think.

Thanks so much!
Jriggy,I`ve used the PWT with my Yamamoto DAC and the combination is superb.I feel the PWT is one of the very best sounding and very natural in presentation transports available. It will mate well with any good DAC IMO.