In brief:
integrate your existing 2 channel into the 7.1 channel rig
In detail:
I had the top Cambridge AZUR AVR and it's matched Bluray player in a discrete 7.1 HT system (both the HT electronics and 7.1 speakers were separate and discrete from my 2 channel audio setup). It was clumsy having two discrete systems ( audio and HT), so I took the big step to upgrade and consolidate as follows:
Keep my REGA Osiris int. amp / REGA Isis valve cdp as my 2 channel but integrate them into my HT as follows:
(1) replace the existing AVR and BR player and 7.1 ML speakers (the full discrete system)
(2) bought a quality 7.1 preamp/processor for HT and surround sound recordings ...NuForce AVP 18 .., a terrific kit and as the CODECS change, it will be the disposable
(3) Bought the ARCAM Bluray player .... A step up (not subtle) to the Cambridge. It us used strictly for HT and surround sound recordings
(4) use the Rega Osiris 2 channel integrated amp via its direct pass through from the NuForce setting as the existing LF and RF speaker power amp.
(5) bought a separate used quality 3 channel power amp (Audio Refinement / YBA) for the Centre Channel and LB and RB surround speakers.
(6) bought a separate used matched 2 channel power amp (Audio Refinement / YBA) to power the side surround speakers.
(7) bought same manufacturer new CC and four new surround speakers (lower on the $$ food chain then my existing 2 channel L and R but still the same brand for synergy ).
(8) bought new hi-end quality ICs and power cables and speaker cables and HDMIs to hook it all up. (Kept all the existing Cables in the 2 channel rig of course)
(9) bought a Vandersteen subwoofer for HT exclusively ( not used in 2 channel mode)
Result:
-- my 2 channel audio system stands alone for critical 2 channel audio but the integrated amp also serves it's role in HT when I switch it over to direct pass through from the AV preamp/processor when HT requires.
-- The NuForce preamp/proc controls everything on its remote when engaged. It has all the latest CODECS and has only HDMI connectors And waves all the legacy ones.
Advantage :
(A) with separates the "disposable " to-be- upgraded eventually portion down the line is the AV preamp/proc without disturbing the rest
(B) The performance upgrade using the separates is graphic .... Stunning rather .
integrate your existing 2 channel into the 7.1 channel rig
In detail:
I had the top Cambridge AZUR AVR and it's matched Bluray player in a discrete 7.1 HT system (both the HT electronics and 7.1 speakers were separate and discrete from my 2 channel audio setup). It was clumsy having two discrete systems ( audio and HT), so I took the big step to upgrade and consolidate as follows:
Keep my REGA Osiris int. amp / REGA Isis valve cdp as my 2 channel but integrate them into my HT as follows:
(1) replace the existing AVR and BR player and 7.1 ML speakers (the full discrete system)
(2) bought a quality 7.1 preamp/processor for HT and surround sound recordings ...NuForce AVP 18 .., a terrific kit and as the CODECS change, it will be the disposable
(3) Bought the ARCAM Bluray player .... A step up (not subtle) to the Cambridge. It us used strictly for HT and surround sound recordings
(4) use the Rega Osiris 2 channel integrated amp via its direct pass through from the NuForce setting as the existing LF and RF speaker power amp.
(5) bought a separate used quality 3 channel power amp (Audio Refinement / YBA) for the Centre Channel and LB and RB surround speakers.
(6) bought a separate used matched 2 channel power amp (Audio Refinement / YBA) to power the side surround speakers.
(7) bought same manufacturer new CC and four new surround speakers (lower on the $$ food chain then my existing 2 channel L and R but still the same brand for synergy ).
(8) bought new hi-end quality ICs and power cables and speaker cables and HDMIs to hook it all up. (Kept all the existing Cables in the 2 channel rig of course)
(9) bought a Vandersteen subwoofer for HT exclusively ( not used in 2 channel mode)
Result:
-- my 2 channel audio system stands alone for critical 2 channel audio but the integrated amp also serves it's role in HT when I switch it over to direct pass through from the AV preamp/processor when HT requires.
-- The NuForce preamp/proc controls everything on its remote when engaged. It has all the latest CODECS and has only HDMI connectors And waves all the legacy ones.
Advantage :
(A) with separates the "disposable " to-be- upgraded eventually portion down the line is the AV preamp/proc without disturbing the rest
(B) The performance upgrade using the separates is graphic .... Stunning rather .