Problems with Parasound AVC 1800

Have you ever tried adjusting your digital input levels ? While i don't think that this is your main problem, it might be worth a try.

I too had to crank the tar out of the volume control to get good levels out of my HT system. Between that and the very slow speed that the volume ramps up or down at, i decided to sell mine. For the money, i think that it was the best processor that i had tried. Too bad it didn't have a phono section or analogue pass through. Then again, you can get these things for "peanuts" now, so you can't really knock them. Sean
>

If noise is coming from your unit send it back. it is probaly the loose solder. This is a known problem with some of thier products. I have many and after they said it could be a ground loop problem they discovered the solder broke off. I have their seperate 1500 pre/pro system with 3 1000a tuner etc. Their customer service is great!! If your unit is slow to volume change remotes.It is not the product. their version of remotes are poor.

I have received an exchange unit from Parasound and it still all the same. If I can live with poppings between CD tracks (some more expensive AV controllers do the same), but the digital noise from the front channels during DD/DTS playback is unbearable for me. Is this problem common for all AVC 1800 or there is something wrong with my setup?
Thanks,
Eugene

Mine is dead quiet.

Eugene, are you feeding the AVC 1800 the signal from your CD / DVD player via a digital coaxial cable ? Sean
>