2. home-theater
  3. 1171989054

Problem with Arcam or JM LABS

I have an Arcam AVR 250 with an Arcam DV78. The speakers are JM Lab 716S Chorus Line(mains) w/ a JM Lab 700S Chorus Line (center) and JM Lab 716S (rears). The front 3 spkrs have Rega cables. The problem is understanding the dialogue from the center channel when watching movies. We think we have everything hooked up correctly and every setting set proberly. We have adjusted and readjusted every setting many times with little or no improvement. I have been running the mains on 0-5 with the center at 6 and the rears around 2-4. I purchased a sound level meter and set the levels correctly. No help. The voices coming from the center sound thick at times and slurred. We have tried the center at 5' and 2' with no improvement. The odd part is that I can understand every word coming from my TV during a broadcast when it is coming out of the center. Is there anything I can do to brighten the sound or is it just the British sound that I will have to learn to deal with. Thank you for your time.
kypride

Showing 5 responses by kypride

kypride OP
18 posts
 
Is there a digital coaxial lead and center channel cable that really helps with dialog? I have been told by some that it doesn't make a lot of difference especially on the coaxial lead. Thanks
kypride OP
18 posts
 
Here are a couple other points of interest that i did not mention about my system. The Arcan AVR 250 and DV 78 both sit in a pine entertainment center. The 250 is located above the 78 with a 1 inch hole drilled through the pine shelf for the cables to run through. The digital coaxial lead runs alongside the two analog interconnects through this hole. All three cables are made by Wasatch. Is it possible that the analog interconnects are causing distortion in the digital cable by being too close or are these cables just junk?
kypride OP
18 posts
 
THANK YOU SO MUCH Mtrot!! I have been waiting for someone to mention this. I am also just north of fifty and share the same feeling about the muttering. It's not just in movies though. Talking to young people these days is like pulling teeth with all that mumbling. Whatever happened to enunciate? You and all the others have been very helpful. I am going to upgrade my CC cable and do a few tweeks and be done with it. Maybe I should run down to Wal-Mart and see if they sell hearing aids. Thanks to all
kypride OP
18 posts
 
Thanks Rick but this is all old news to me. I purchased a sound level meter with little or no improvement. I agree with Shane and Jeff but the calibration and delays are set perfect. I am going to switch from the Rega cables going to the center shortly. I am breaking in a set of Oval 9s on another system right now to try on the center later. I am also looking for a recommendation on a digital coaxial cable from anyone who has seen improvement on their system from using one. I have a Wasatch on it now and I'm beginning to believe it is of very poor quality. I bought the system as a whole from a dealer and I think most of the cables are junk. Any cable recommendations would be greatly appreciated, as this will be my last investment in this problem.
kypride OP
18 posts
 
I am now considering ugrading my center to a JM Lab Cobalt or Electra line from my original Chorus CC700. Is there anyone out there who can honestly say that this upgrade will really make a difference. Thanks to all.
More to discover