Power Cord Suggestions REF 5se


Just got a recently purchased ARC REF5se back from the shop and really got to hear it for the first time. The output caps were replaced, due to a long story for another time. Anyway, it is fixed and working correctly. At the end of the first night I came to notice that the high end was a little....fatiguing after several hours. I suspect that some is due to the need of the caps to burn-in, could some perhaps be due to the factory pc?

I am currently thinking about a replacement pc and would like to get some suggestions from guys familiar with the 5se. I am running Pass 260.8 with it and had been using a LS27 before getting the 5se and the top end was not nearly as fatiguing.

As it is a 20a plug and I do not have any on hand to swap and try I am hoping someone has already gone through the task. As I am convinced that pc make a difference, I am looking for a couple of names that I should investigate and for a pc I think used is fine, as it will also limit the downside should it not mate well in my system.

I have spent hours looking and researching a half dozen so far, with literally hundreds more to go. I am hoping for a short list of cable manufacturers/models to keep an eye out for.

BTW-I would like to stay away for a discussion about the validity of cables, I am a believer so if you are not, that's fine. Let's take it from there.

SteveA
128x128stevea11757

Showing 1 response by kingpin75s

I would recommend you get in touch with Chris at Sain Line systems if you have not made your choice yet.  His Pure Current (called Pure Audio above) power cables is what is used at ARC to voice their systems.  They use his power cables because historically they have considered his power cables the very best, regardless of cost.  I have been to the ARC lab recently (10 min from my office) and have seen the his power cables in their lab myself.   I also use Sain Line power cables in my Aesthetix, Rogue, Revel based system. I highly recommend them.