2. cables
  3. 127609-2135

Power cable for Arcam AVR400

Wondering what recommendations people might have for a power cable for this Arcam AVR.  Somewhat complicated task, supplying both digital and power needs when operating in 5.1.  I also use for two channel (~70% of time) with external DAC and shut down all digital circuits for this application, so then functioning as medium power 2 channel integrated.

Receiver rated at 90 watts into 7 channels and 100+ into 2 channels.  I am currently using Shunyata Diamondback, which is a decent power cable for general use, plugged directly into hospital grade wall outlet with dedicated 20 amp supply line.  Nothing broken, just on quest to make it better than if possible.  Would spend up to ~$500 for cable.  Input based on your direct experience with AVRs appreciated.

kn
knownothing

Showing 2 responses by dlcockrum

dlcockrum's avatar
dlcockrum
2,190 posts
 
Hi knownothing,

I have tried several "inexpensive" power cords with my Onkyo 885 (Integra 9.8) processor and had the best luck with the old SR A/C Master Coupler, X-series (active shielding) and X2 (better active shielding), the latter being the best. All are a great value used and can be bought from $150 - $300.

Even the non-active A/C Master Coupler (~$150 used) does a good job of improving sound and video quality and can pass more than enough current for your AVR.

Best to you knownothing,
Dave
   
dlcockrum's avatar
dlcockrum
2,190 posts
 
Never found power cords to be component brand dependent...

Dave
More to discover