I own a DPS table as well.
VTA is extremely easy to change with DPS/Rega arm.
It should of come with the proper sized hex screw to change it.
I used a deck of cards, and this made setting VTA very easy and repeatable.
For me it was usually between 5 or 7 cards depending on record thickness to get the best sound. I had a ZYX Atmos however.
Look on the arm side of the table, you should have a hole in the black acrylic plinth.
IF you are unable to adjust VTA with the hex screw in that hole, it is because you have the lug nut of the Rega arm tightened against the underside of the black acrylic and thus you have no freedom of movement on the tonearm. The lugnut should be towards the bottom of the Rega stub, only serving the purpose of preventing you from pulling the arm out of the hole completely. The VTA adjusting hex screw is what really holds the arm in place.
VTA is extremely easy to change with DPS/Rega arm.
It should of come with the proper sized hex screw to change it.
I used a deck of cards, and this made setting VTA very easy and repeatable.
For me it was usually between 5 or 7 cards depending on record thickness to get the best sound. I had a ZYX Atmos however.
Look on the arm side of the table, you should have a hole in the black acrylic plinth.
IF you are unable to adjust VTA with the hex screw in that hole, it is because you have the lug nut of the Rega arm tightened against the underside of the black acrylic and thus you have no freedom of movement on the tonearm. The lugnut should be towards the bottom of the Rega stub, only serving the purpose of preventing you from pulling the arm out of the hole completely. The VTA adjusting hex screw is what really holds the arm in place.