I'm not familiar with the NAD preamp or HT receiver but, in partial answer to your question, a preamp isn't a phono stage. Some preamps do, however, have a built in phono stage or amp. A phono amp is excactly what the two words say. It is a amplifier for a phono cartridge. The output from your cartridge is very low and needs to be amplified.
Phono stage / Preamp Question
Hi,
This is my first post here, and I'm about to reveal my absolute newbie status with it, so I apologize if the old hands think this is an asinine question.
I'm not exactly an audiophile (too poor graduate student), but definitely an enthusiast in both Stereo Audio and Home Theater audio. I have a modest home theater setup from Onkyo that has to double as my stereo audio system as well.
I'm starting to wander into new territory and I'm thinking about adding fairly serious analog capability to my system in the form of an entry-level audiophile turntable (NAD 533, Pro-Ject 1 Xpression, etc). As such, I also need to add a phono preamp since my modern HT recvr has no phono inputs.
My question is this: can I connect a full on preamp such as a NAD 1020 to my integrated amplifier through one of the AUX inputs? Phrased another way; Can I use a NAD 1020 preamp as a phono stage?
My question steps from a lack of real understanding of what the preamp does. It would seem to me that using a NAD 1020 preamp into an integrated amplifier (built in preamp) would put the signal through 2 preamp sections in succession. I have no idea what effects this would have on the signal, or if it would damage my integrated amplifier.
I'm thinking about the NAD 1020 as I'd like to eventually separate my 2-channel and HT systems, and using the NAD as a phono stage would mean that I'd already have a pre-amp when I do decide to make that step. Buying used, it's no more (probably cheaper) than a quality dedicated phono pre-amp, so I can't see any disadvantage to it unless it's going to kill my current integrated amplifier or something.
Any help?
This is my first post here, and I'm about to reveal my absolute newbie status with it, so I apologize if the old hands think this is an asinine question.
I'm not exactly an audiophile (too poor graduate student), but definitely an enthusiast in both Stereo Audio and Home Theater audio. I have a modest home theater setup from Onkyo that has to double as my stereo audio system as well.
I'm starting to wander into new territory and I'm thinking about adding fairly serious analog capability to my system in the form of an entry-level audiophile turntable (NAD 533, Pro-Ject 1 Xpression, etc). As such, I also need to add a phono preamp since my modern HT recvr has no phono inputs.
My question is this: can I connect a full on preamp such as a NAD 1020 to my integrated amplifier through one of the AUX inputs? Phrased another way; Can I use a NAD 1020 preamp as a phono stage?
My question steps from a lack of real understanding of what the preamp does. It would seem to me that using a NAD 1020 preamp into an integrated amplifier (built in preamp) would put the signal through 2 preamp sections in succession. I have no idea what effects this would have on the signal, or if it would damage my integrated amplifier.
I'm thinking about the NAD 1020 as I'd like to eventually separate my 2-channel and HT systems, and using the NAD as a phono stage would mean that I'd already have a pre-amp when I do decide to make that step. Buying used, it's no more (probably cheaper) than a quality dedicated phono pre-amp, so I can't see any disadvantage to it unless it's going to kill my current integrated amplifier or something.
Any help?