Pairing of different JL Audio Subwoofers

This is great news. @millercarbon, I never thought that having more would reduce the need to EQ the room. Thanks for the link.

@kr4, I am glad to hear that you have a similar setup. This gives me all gives me a piece of mind.

Would you recommend I daisy chain them or wire them using the two subwoofer outputs from the preamp?

Would you recommend I daisy chain them or wire them using the two subwoofer outputs from the preamp?

If you are going to use the D.A.R.O. in one sub to EQ the entire set (as I do), you will have to use a single output from the preamp and daisy-chain the subs.

Are you planning something different?

This might be a problem as the F112 has a XLR output and the E112 does not accept XLR input. I would have to use the RCA output of the E112 to input it into the F112. 

I wonder if the D.A.R.O. would still work in this configuration.

Chief, I think you would be better served by getting three more E112's
With four of them you will not need DARO. 

Just read that the Fathom has to be set to MASTER and all others (up to 10) to SLAVE. Then to daisy chain each slave sub with XLR cables from the sub designated the master. When set up in this way all subs are measured and corrected as a single entity.

@mijostyn, you may have a valid point. Since the cabling configuration does not seem to support my vision of using F112 as the slave, I may just have to aggregate one or two more subs. Really don't want to go this route but seems like there is not other way.