Ortofon MC A90 Cartridge VTF


I just spent the weekend at mikelavigne's where we did a comparison with three turntables all using the same Ortofon MC A90 cartridges. We had the cartridges setup at the recommended VTF and they did not all have the same amount of break-in time on them. I decided to see what would happen when we lightened the cartridges up.

We started on the first table and the weight was about 2.25. We lessened the weight until I thought that the sound really locked in. By the time we were done on the first turntable, the VTF was at around 1.56. When we did the second table we got the weight all the way down to 1.92. On the third table it ended up best at about 2.01.

All parties (myself, Mike and Steve) agreed that lightening up the carts really opened things up quite a bit without loss of bass. The inner detail and delicacy inreased as did speed and dynamics.

I called Ortofon and am awaiting a response but I was wondering if those of you who own this cartridge have gone outside the recommended range and if you could share your experiences.

There is more to read about this if you want under mikelavigne's system thread.
jtinn
I keep it 2.18-2.2g with the tail raised half as much, on a typical 140g LP, as I raise it when adjusting from level on a 140g to level on a 180g LP, using a Triplanar VIIuii. 2g is too light for mine--it tracks fine there but becomes too lean sonically for my taste. Higher than 2g slows the transients.