Origin live Silver or VPI JMW-9 Signature

I must admit it is a bit of a jungle with the infinite numbers of combinations with arms and cartridges. Guess that is also what makes it fun :)

Drminky does bring up a good point that you should consider. That is, what are you likely to do in the future regarding cartridges? And, very important, what table are you using?

If you don't intend in venturing beyond, say a $1K cartridge investment, then I would think that arm based on the Rega design is probably just as good as the JMW-9. At the same time please consider that a cartridge in the range of the Denon 103R will perform extremely well on an arm of a little higher range, and that higher quality arm will open a larger door of opportunity regarding cartridge choice.

Moerch is good choice, but IMO I'd look for a Graham 2.2 to get the more user friendly VTA/VTF adjustments. A used 2.2 can usually be had for not much more than the Moerch. Another option is the Basis Vector. This is an excellant tracking arm and can handle a multitude of cartridges firmly. Not much in the way of easy VTA/VTF but no worse than the OL or JMW-9 you've been considering. You'll have a hard time finding a cartridge that the Vector can't handle, but mounting can be a bit tricky depending on the table you're using.

To sum up, what table are you using, what cartridge might you consider after the 103R, and what is your budget?

The turntable that I am using, is a DIY project. It is based on a 80 mm acrylic platter and bearing from Scheu Analogue (I believe the brand is known as Eurolab in USA). It is a rigid construcion with no suspension standing on 3 Boston Audio tuneblocks. The Plinth is made out of multiple layers of birch plywood that has been dampend with about 25 pounds of led shots. It also has a rubber/cork compound layer. I'm currently experimenting with armboard material, and will try solid maple, plywood with a cork layer, aluminium and several others.

In regards to future cartridge investments, I'm probably going to end up buying a Shelter 901 or Perhaps a Dynavector 17DMKII in between the Denon and the Shelter.

Initially my budget for a new tonearm was around $1000, but I am now considering maybe spending a little more and going for the really great arm right away. I figure I'm probably going to upgrade again, so why not do it straight away. That brings me in the range of the Graham 2.2, Basis Vector, Origin Live Illustrious and others in the $1500 range (used).

That sounds like a good idea as long as you can swing the extra budget.

Last spring I was able to hear a new Teres model that was built entirely from birch ply and hardwood. It sounded very nice. Not as detailed and dynamic as a cocobolo model, but still very nice. I wish I could remember if the armboard was made from ply or solid birch. I'm guessing there was some ply in there as well.

I bet an armboard of ply and hard maple would do pretty well. You've probably already thought of this but try to get the good baltic birch that's made with many tight layers. That should help with the dampening and I rarely find voids in it.

Aluminum could work well and I'd also suggest brass.

Good luck!

Dan

>>Not much in the way of easy VTA/VTF but no worse than the OL<<

Hi Dan, Actually VTA on the Vector 3 is very very easy if the arm is ordered with the VTA micrometer. VTF is adjusted by moving the counterweight. It will track virtually any cartridge with extreme precision and the build quality is superior to any OL arm.